Celsicom MM611B – moisture sensor with 1.2 m cable
Directly connected remote monitoring of humidity level
- Monitor moisture levels remotely on your phone, computer or tablet.
- Adjustable measurement curve for pine, spruce or WME
- Low price on unlimited cloud storage
4 250:- exkl. moms
Finns i lager
Finns i lager
Celsicom MM611B – Directly connected humidity logging.
The MM611B is used to measure moisture in structures via nails/screws installed in the material. In the Celsiview cloud service, you set the desired measurement curve, such as for pine, spruce or WME.
No gateway or base station needed
All loggers in the new Celsicom generation have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.
Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly see the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.
Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview. Ordinarie pris för molnlagringen är 22:– i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.
Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.
Included in the delivery
A Celsicom MM611B moisture meter
Measuring range resistance: | 50 kOhm to 1 GOhm |
Accuracy resistance: | ±15 % (200 kOhm to 800 MOhm) |
Measuring range pine (Trätek): | 11.5 % ... 45 % |
Accuracy pine (Trätek): | 3 % of reading (12 % to 26 %) |
Measuring range spruce (Trätek): | 11.5 % ... 46 % |
Accuracy spruce (Oak): | 3 % of reading (12.5 % to 27 %) |
Measuring range WME: | 9.5 % ... 50 % |
Accuracy WME: | 3 % of reading (10 % to 25 %) |
Recommended batteries: | 2 x AA 1.5V alkaline |
Dimensions MM611B (mm) and weight: | 78 (w) x 114 (h) x 30 (d) and 114 gr |
IP class: | 53 |
Cable length: | 1.2 m |
Measurement range: | 1 hour (standard) or 3 hours |
Transmission interval: | 1 hour, 3 hours (standard), 6 hours or 12 hours |
Operating time on batteries with default transmission interval setting and normal signal quality: | ≈ 12-18 months * |
Storage time of measurement data (cloud service): | 36 months |
*Many factors play a role regarding operating time on battery. Battery quality, signal quality and ambient temperature are some important parameters. If the sensor is forced to alarm unusually often for exceeded limit values, the operating time is also reduced. |
-
AA alkaline battery
10:- exkl. moms Art.nr 0515 0026Alkaline AA battery, 1.5 volts, type LR6. The price is for 1 battery. -
Magnetic mounts
59:- exkl. moms Art.nr 7040 0060Magnetic mount that facilitates the installation of Celsicom Easy Connect sensors and avoids interference. Used to attach the sensor to metal surfaces (not certain types of stainless steel). The mount consists of a 10 mm thick plastic part with a double-sided adhesive tape on one side and a magnetic tape on the other. As the sensor comes out 10 mm from the metal wall, the metal in the wall does not affect the radio transmitter/antenna of the sensor. If the distance is shorter, the sensor's reception ratio will be very negatively affected.- Clean the back of the sensor from dirt and grease. Make sure the surface is dry.
- Remove the protective plastic from the double-sided tape and install the bracket on the lower part of the back of the sensor (see picture). Press the bracket against the sensor for about 10 seconds.
- Now attach the sensor to any metal surface. However, mounting against some stainless steel variants will not work.
-
Service bag for measuring boxes
895:- exkl. moms Art.nr 7016 6012Practical and durable bag with room for four gray Celsicom Easy Connect boxes as well as sensors, mounts and other accessories. External dimensions (width x height x depth): 390 x 310 x 140 mm).
Similar products
Protimeter SurveyMaster – moisture meter
Precise material moisture measurement in wood with characteristic curves
- Moisture indication in building materials
- Accessory hammer sensors
- LED lights for visual moisture detection