Celsicom V600 front view with right hook and hose
Celsicom V600 rear view with right hook and hose
Celsicom V600 oblique front view
7040 2004 Hook for Celsicom V600 and hose piece
Celsicom V600 - reference meter for ventilation tuning
Celsicom Easy Connect gray box without lid

Celsicom V600 – reference meter for ventilation tuning

Mobile connected measuring instrument for time-efficient ventilation adjustment

  • Easy to use - just connect the meter to the reference device and it's ready to start measuring
  • Shows the reference device flow as a percentage of the designed flow (according to the proportionality principle)
  • Can display flow in l/s or m³/h and pressure in Pa.
  • You simply enter the values of the reference actuator + additional actuators (tuning values) in your mobile browser

 6 990:- exkl. moms

Finns i lager

Finns i lager

SKU: 7250 6004 Categories: , , , , , , Tags: ,

Celsicom V600 – adjustment of ventilation

Celsicom V600 is a special development of the Celsicom monitoring system. The measuring instrument is designed with a focus on fast and efficient adjustment of ventilation. The meter is connected, wireless and powered by two standard, replaceable AA batteries. The operating time is around 150 hours (depending on ambient temperature, signal strength and battery quality). You have the option to add sensors to the V600 to monitor additional quantities such as temperature, humidity, radon and CO2. Note! If a measuring hose or measuring hook is connected to the instrument, the hose/hook may be a maximum of 1.0 m long and must have an internal diameter of at least 3.0 mm.

Simplified tuning using your mobile phone

The V600 reference sensor meter allows you to make a ventilation adjustment completely on your own. Just connect the meter to the reference device and you are ready to start measuring.

No gateway or base station needed

All of the new generation of Celsicom measurement products have a direct, secure transfer of data to the cloud without the need for a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero. On your mobile phone, you then monitor the pressure and flow of the reference device.

Clear interface

On the Celsiview mobile website, enter the K-factor and the projected flow of the reference device. The adjustment is made according to the proportionality principle. That is, the mobile shows the reference device’s flow as a percentage of the projected flow and what flow the other devices should be adjusted to. If there is a change in pressure, the values are recalculated within seconds, so you always have up-to-date measurement data from the reference air outlet meter. The interface can be set to display the flow in l/s or m³/h and the pressure in Pa on the sensors.

Easy to get started

To start using the Celsicom V600, simply scan the QR code inside the meter and log in (or create an account) to the Celsiview cloud service where you also register the hardware. Shortly afterwards, you can easily make the settings and start the adjustment work via your mobile.

Molntjänsten Celsiview

Webbaserade tjänsten Celsiview är en förutsättning för att kunna utföra ventilationsinjusteringar med Celsicom V600. Priset för Celsiview är 151 kr i månaden per referensdonsmätare. Då ingår också kostnaden för all datatrafik.

Till Celsiview

 

Included in delivery

Celsicom V600 reference anemometer, holder with magnetic attachment, measuring hook and hose

Measuring range:±320 Pa
-30 °C ... 70 °C
Accuracy:3 % of the measured value (Pa)
±2 °C
Differential pressure measuring technique:Flow measurement
Recommended batteries:2 x AA 1.5V lithium
Dimensions (mm) and weight:78 (w) x 114 (h) x 30 (d) and 119 gr
IP class:43
Update frequency:From 1 second
Det finns inga givare till denna artikel.
Det finns inget att ladda ned för denna artikel.

Skriv din fråga i det här fältet.

Similar products

testo 440 dp with Swedish display

testo 440 dP – multi-instrument with differential pressure

Multi-instrument with integrated differential pressure sensor

  • Display airflow in l/s or m3/h
  • Clearly structured measurement menus
  • Report function
  • Wide range of digital sensors, both wireless and wired.

Read more
testo 400 with Swedish display text

testo 400 – climate instrument for ventilation and indoor climate

Climate instrument for all ventilation and indoor climate professionals with a large touch screen.

  • Shows the air flow rate in l/s or m3/h
  • Integrated rear/front cameras (8 megapixel / 5 megapixel)
  • Highly accurate and position-independent differential pressure sensor
  • High quality digital sensors, both wireless and wired.

Read more