testo Saveris 2-T2 – temperature logger for 2 external sensors
Remote monitoring WiFi temperature logger for 2 external sensors
- Remote monitoring via local WiFi network and free cloud service
- For two connectable temperature sensors (NTC)
- Measurement range: -50 ... +150 °C
2 395:-
Finns i lager
Finns i lager
testo Saveris 2-T2 – Remote monitor and data logger for 2 external sensors
The WiFi data logger testo Saveris 2-T2 is the simple, versatile solution for measuring, logging and monitoring temperature values from 2 external sensors in your warehouses, cold stores, workrooms, etc. Installation of the system is child’s play and can be carried out via a web browser.
Technical features and practical benefits
- Remote monitoring via local WiFi network and free cloud service
- For two connectable temperature sensors (NTC)
- Measurement range: -50 … +150 °C
- Internal data memory for 2 x 10,000 measurements
- Dustproof and protected against water splashes according to IP65
- Tested by TÜV Süd and complies with EN 12830
- Wireless reading and monitoring via WiFi network
- Double security – measurement data is stored both in the logger and the cloud service
- Simplicity – no software needs to be installed – all you need is an internet connection and a WiFi network.
- Reliable alarms – exceeded limit values are immediately reported via SMS or email.
- The standard batteries (AA) have a lifespan of 12 months and can be replaced at any time by the users themselves.
- Current measured values, limit value violations and remaining battery life can be seen in the data logger display.
Temperature monitoring with testo Saveris 2-T2
In addition to logging and storing temperature readings from 2 external NTC sensors, the Saveris 2-T2 data logger can also transport the measurement data in real time to your smartphone, tablet or computer. All measurement data is stored in each logger for extra security and sent to the Testo cloud service via your wireless WiFi network. Again, the measurement data is stored securely and can be easily accessed from anywhere in the world. By setting limits, you are immediately informed by email or optional SMS if any of these limits are exceeded.
Testo Cloud-paketen: Basic (gratis) och Advanced
Testo Cloud är kontrollpanelen för att installera ditt Saveris 2-system. Här konfigurerar du dina WiFi-dataloggrar, ställer in gränsvärden och analyserar din mätdata. Du kan komma åt alla mätvärden och analysfunktioner var som helst och när som helst med en internet-uppkopplad smartphone, surfplatta eller dator.
Det är du själv som registrerar det kostnadsfria Basic-kontot på molntjänsten Testo Cloud. Därefter kan du utöka din licens till ett Advanced-konto genom att logga in på molntjänsten och klicka på länken längst upp till vänster i Testo Cloud och följa anvisningarna. Kontot förnyas varje år tills du säger upp det.
Läs det här innan du skapar ett konto >>
Vid registrering av molnkonto för testo Saveris 2 och testo 160 krävs en e-postadress för registrering. Vi rekommenderar att du inte väljer en "personlig” e-postadress. Det är bättre att skapa en ”allmän adress” som inte är kopplad till en specifik person. Ett förslag kan vara ”info@exempel.com”, ”saveris2@exempel.com” eller liknande. Denna adress blir i grunden en administratörsadress som inte går att ta bort på molnkontot. Det är viktigt att denna adress kan läsas av de som är ansvariga för systemet. Testo skickar bland annat information om förnyelse av betaltjänster till administratörsadressen, en månad före huvudförfallodagen varje år. Om du inte vill förnya tjänsten måste du meddela det före förfallodagen.
Gränsvärdeslarm via SMS eller e-post, detaljerad utvärdering och analys av mätvärden, automatiska rapporter, mätdata sparas i 24 månader, administration av användare. Dessutom ingår 25 sms per nystartat Advanced-konto. Läs mer om skillnaderna mellan Basic och Advanced på den här länken.
Påfyllning av sms till Testo Saveris 2 Cloud-service Advance: Logga in på ert Testo Saveris 2 administrationskonto, välj Account Owner och därefter Kontoinformation och välj ändra Licens.
Included in delivery
- WiFi data logger testo Saveris 2-T2
- Free cloud access (Basic)
- Micro USB cable
- Wall bracket with lock
- Batteries (4 x AA AlMn Mignon batteries)
- Short instructions
- Factory protocol
Fabriksprotokoll: utfärdas på fabriken efter en kontroll av att produkten fungerar och uppfyller angiven mätnoggrannhet. Läs om skillnaden mellan fabriksprotokoll och ackrediterad kalibrering.
ATTENTION! In order to use the WiFi data logger testo Saveris 2-T2, at least one NTC-type temperature sensor must be connected. Available under the “Donors” tab
Sensor type | NTC |
Number of channels | 2 channels (for external sensors) |
Measurement range | -50 °C...+150 °C |
Resolution | 0.1 °C |
Accuracy ÷1 digit | ±0.3 °C |
Memory | 2 x 10,000 readings |
Log interval | 1 min...24 h (15 min. default) |
Communication interval | 1 min...24 h (15 min. default) |
Operating temperature | -35 °C...+55 °C |
Storage temp | -35 °C...+55 °C |
Battery | 4 pcs AlMn AA, at ambient temperatures below +10° C, Energizer batteries must be used. |
Battery life | 24 months at + 25°C and 15 minute measurement and communication cycle, at -30°C and 15 minute measurement and communication cycle with Energizer type batteries 0515 0572 |
Size | 95 x 75 x 30.5 mm |
Weight | 240 g |
Protection class | IP 65 |
PC connection | USB (standard to micro-USB) for programming |
Guarantee | 2 years |
Door contact sensor | Yes as an option |
Digital temperature probes
NTC probes
-
Inserting sensors
1 120:- Art.nr 0613 1212This waterproof insertion sensor (NTC) with 1.2 meter cable is used for a variety of applications and has a measurement accuracy that is truly impressive. -
Surface temperature sensor NTC
1 260:- Art.nr 0613 1912Waterproof surface temperature sensor with flat measuring tip for flat surfaces. NTC sensor. -
Robust air sensor
1 120:- Art.nr 0613 1712Robust air sensor. Exposed sensor for fast response times. -
Stainless steel food sensors
1 655:- Art.nr 0613 2211Stainless steel food sensor (IP65) with PUR cable. -
Stainless steel temperature sensor
2 080:- Art.nr 0613 3311Hygienic stainless steel temperature sensor (IP 67)- Teflon-insulated cable that can withstand temperatures up to +200 °C (Note: the measurement range is +150 °C).
- Suitable for use in smoking and cooking cabinets and in environments with strong chemicals.
-
Robust insertion sensor for food
1 580:- Art.nr 0613 2411Robust food insertion sensor with special handle, IP65, reinforced cable (PUR) and reinforced protection against deformation. Ideal for the charcuterie industry. -
Tube temperature sensor for testo 550/557
645:- Art.nr 0613 5505Temperature sensor for measuring on pipes with diameters from 6 mm to 35 mm. -
Pipe sensor with Velcro max 75 mm
1 200:- Art.nr 0613 4611Pipe sensor with Velcro, for pipes with a maximum diameter of 75 mm. -
Short sensor
495:- Art.nr 0628 7510Short sensor 35 mm (IP 54) for air/gas applications. -
Temperature sensor with corkscrew tip
2 420:- Art.nr 0613 3211Frozen food dispenser with corkscrew tip. -
Plug-in sensor with flat cable
1 020:- Art.nr 0572 1001Accurate insertion sensor with 2 m Teflon-insulated cable Tmax +125°C. -
Temperature sensors for wall surfaces
820:- Art.nr 0628 7507Surface temperature sensor that is screwed to the wall. -
Dip/insert sensor long cable
1 035:- Art.nr 0610 1725Accurate dip/insert sensor with 6 m cable. IP 67. -
Dual sensors for air, gas and liquid
605:- Art.nr 0628 7503Dual sensor for air, gas and liquid with aluminum sleeve, IP 65 -
Dip/insert sensor short cable
900:- Art.nr 0628 0006Accurate dip/insert sensor with 1.5 m cable. IP 67 -
Digital card NTC temperature sensor
1 550:- Art.nr 0572 2162Digital temperature sensor without cable for testo Saveris. Measurement range: -30 ... +50°C.
-
Power supply unit with wall bracket
445:- Art.nr 0572 2020Power supply unit with wall connection for the testo Saveris 2 monitoring system. 1.5 meter cable with ferrite core to protect against interference. -
Connection cable for door contact
195:- Art.nr 0572 2152Cable for door contact to Saveris 2-T2. To detect buzzer alarms, door contacts or other on/off functions. Fully molded DIN connector that fits the temperature input of the Saveris 2-T2. Cable length: 2 meters. -
Magnetic attachment for wall holders
260:- Art.nr 0554 2001Magnetic mount compatible with the wall brackets of the previous and new generation of data loggers of the testo Saveris 2 series as well as the loggers of the testo 150 series.
Similar products
testo 175 T3 – temperature logger for 2 external sensors
2-channel temperature logger for thermocouple sensors
- Efficient reading via USB or SD card
- Measuring range -50... 1000°C
- Thermocouple sensor type K or T
testo 176 T2 – temperature logger for 2 external sensors
2-channel temperature logger for high accuracy Pt100 sensors
- -100... 400°C
- Resolution 0,01 °C
- Large clear two-line display