Energy and power logger PEL113
Energy and power logger PEL113 with accessories
Energi- och effektlogger PEL113
Energy and power logger PEL113 in use

CA PEL 113 – power and energy logger with WiFi

Monitor your electricity network, your consumption and check your energy costs.

  • Measures, among other things, current, voltage, energy and all effects on 1- or 3-phase installations.
  • Wi-Fi, Ethernet, USB and memory cards
  • Overtone analysis up to the 50th overtone

 27 590:- exkl. moms

Delivery time: 5-10 working days

Delivery time: 5-10 working days

SKU: 6010 0113 Categories: , , , Tag:

CA PEL 113 – power and energy logger with WiFi

PEL 113 is an easy-to-use and portable instrument for energy analysis and energy optimization, including pre and post measurements. Measures, among other things, current, voltage, energy and all effects on 1- or 3-phase installations. Perfect for a longer measurement on a site to see the total energy consumption or the produced energy from a PV installation. With its very wide measuring ranges on both DC and AC voltage as well as AC and DC current, the PEL 113 can be used in a variety of electrical installations. All depending on which current clamps are connected. Both voltage and current ranges can be set up to 650 kV and 25 kA (10 GW).

Communication

Wi-Fi, Ethernet, USB and memory card. With the PEL113 connected to Wi-Fi, via a network or directly to a PC, both alarms and automatic reports can be created and sent by e-mail. Wi-Fi can either be connected to a network via a server, or directly to a PC or smartphone. IRD DataView Synch connects to a secure server so that all measurements are available wherever you are.

Measurement

Stores min, -max and average values of each second with a sampling rate of 128 measurements per period (20 ms) of power and energy consumption in all four quadrants. The PEL 113 shows processes down to 200 ms. Simultaneously, power factor measurement and total and individual harmonic analysis up to the 50th harmonic are performed, all of which are stored in memory.

memory

For example, with a 10-minute period selected with 1 s trend over 30 days, 3.2 GB is used. If 1 s trend is not selected, 0.52 GB is used. The supplied memory card is 8 GB and the PEL 113 can handle cards up to 32 GB.

Software

Supplied with Swedish license-free software and Swedish manual. For measurement of transients and fast processes below 1 ms, we recommend our Qualistar series CA8331, CA8333, CA8336, CA8436 and CA8435

Supplied with

Case, software, 3 x 100mm diameter MiniFlex pliers, 4 x 3m power cables and alligator clips, SD card, USB cable and power cord

ModellPEL113 med MA194-350 rogowskispolar och spänningsadapter
Display4-raders bakgrundsbelyst display
SpänningAC+DC TRMS 5 V....1000 V
Effektmätning10 W...10 GW, 10 VA...10 GVA, 10 var...10 Gvar
StrömtängerJa med 3 st MA194 200 mA...10 kA RMS rogowskispolar 35 cm längd
ElmotortestJa, med Android-applikation
KommunikationWi-Fi, både som accesspunkt eller Hotspot-funktion, IRD-server, Dataview-synkronisering, USB samt Ethernet
MjukvaraDataview licensfri på svenska nedladdningsbar på vår webbsida
Användningstemperatur0º C... + 50º C
KapslingsklassIP 54
Garanti2 år
SäkerhetskategoriIEC 61010 kat. IV 600 V / kat. III 1000 V
Det finns inga givare till denna artikel.
Det finns inga tillbehör till denna artikel.
Icon
Datablad för PEL 113 (eng)
476 downloads2.95 MB

Skriv din fråga i det här fältet.

Similar products

If you cannot find what you are looking for, please contact us: 031-704 10 70.