CA PEL 103 – power and energy logger
Monitor your electricity network, your consumption and check your energy costs.
- Single-phase, two-phase and three-phase installations, etc.
- The installation is carried out without breaking the power circuit.
- Overtone analysis up to the 50th overtone
24 900:- exkl. moms
Finns i lager
Finns i lager
Optimize your energy efficiency with the CA PEL 103
Ergonomic and compact with a magnetic back, the instrument easily fits in an electrical cabinet, where it records all power and energy values. In a worldwide initiative to protect our environment, Europe has set a target to reduce energy consumption by 20%. Today, industries and buildings account for more than 50 % of total energy consumption. To achieve the goal of reducing consumption, different types of energy optimization are needed.
The energy logger measures energy and effects on all types of electrical installations. Measurement is performed with 3 current clamps and 3 voltages. They show all the electrical parameters needed to achieve success in energy saving. Even the electrical installation is monitored with harmonics and effects. The PEL103 is easy to install without breaking the power circuit. The magnetic backing makes it easy to mount the instrument on the inside of the cabinet door.
The PEL103 makes it easy to add measuring equipment to electrical cabinets where space is limited, without breaking the circuit. The magnetic backing makes it easy to attach it to the inside of a cabinet door.
The PEL 103 allows you to monitor the electricity network, consumption and control energy costs.
Features
- Frequency, voltage and current TRMS
- Power values VA, W; var
- The energy values VAh, Wh (from source and load) and varh (4 quadrants, and total energy
- cos, tan and power factor (PF)
- Crest factor
- THD total harmonic content for current and voltage
- Individual harmonics up to 50th for both current and voltage
- Measures on DC, 50Hz, 60Hz and 400Hz
- AC and AC+DC TRMS
- Display on LCD screen (PEL 103)
- Stores all measurements to SD card
- Automatic recognition of current clamps
- Prepared for many different electrical networks: one-phase, two-phase, three-phase, with or without zero, etc.
- Communication: USB, Bluetooth
- Swedish software also for real time
Monitoring energy consumption
With the PEL103, even the smallest consumption can be monitored in buildings, industries and other electrical environments. They simultaneously measure both real-time measurements and display previous measurements and analysis.
Preventive measurement
When used for a long time, the PEL103 logs all active, reactive and apparent effects on the network. This means that in case of a power peak, it will be immediately registered. With the Swedish software, automatically generated reports can then be made for analysis.
Centralized consumption info
With multiple PEL103s on a network, analysis can be done on an entire site. Via Ethernet, USB or Bluetooth in real time.
- street lighting
- lighting in buildings
- network monitoring
- general one-barrel systems
- three-phase distribution
Measure what you save
The measured values stored in the PEL 103 are time and date stamped. This makes it easy to see where you are saving in energy consumption when measuring before and after a renovation. Reference values are obtained from previous measurements made with the PEL 103 at the same location. A properly installed PEL 103 gives you a quick overview of the installation, and because it is removable, an easy installation without breaking the power circuit. For measurements lasting a few days or a week, this is an advantage.
DataView software
The software allows you to:
- Configuring the PEL103
- Verify that the connections are correct before measuring.
- Download all recorded measurements from PEL 103
- Display all parameters and analyze the results
With the Swedish DataView® software, you can get automatically generated reports. In addition, generation of energy reports in a simple way.
Included in delivery
Power and energy logger PEL 103, with 3 current clamps Miniampflex MA193 – 200 mm, cable length 3 m, 4 measuring cables 3 m length, 4 crocodile clips, SD card 2GB (Up to 32GB can be used), SD-USB adapter, labeling kit for cables and clamps, 230V power supply cable, USB cable (type A/B 1 m), Multifix magnet system for easy attachment, manual, bag, safety sheet and Swedish version of Dataview software.
Model | PEL103 |
Display | Yes, with three-part display |
Mains type | One-phase, two-phase, three-phase, with or without neutral and several other configurations |
Accuracy class | 0,2% |
Electrical Specifications | |
Number of channels | 3 voltage inputs / 3 current inputs with calculation of zero current |
Mains frequencies | DC, 50 Hz, 60 Hz & 400 Hz |
Voltage range | Voltage: 0 to 1000 VDC |
Current clamp MN93 MN93A C193 A193 and MA193 PAC93 E3N | from 2 to 240 AAC, from 0.005 AAC to 5 AAC/0.1A to 120 AAC from 3 A to 1200 AAC from 100 mA to 10000 AAC from 10 A to 1000 AAC/10A to 1400 ADC from 50 mA to 10 ADC / from 100 mA to 100 A AC e DC |
Voltage conversion / Current conversion | Up to 65 kV / Up to 25 kA |
Calculated quantities | |
Effect | From 10 W to 10 GW / from 10 var to 10 Gvar / from 10 VA to 10 GVA |
Energy | Up to 4EWh / 4 EVAh / 4 Evarh |
Phase | cos, tan, PF |
Overtones | up to the 50th |
Additional functions | |
Phase indication | Yes |
Min / Max | Yes |
Attachment | Magnet or with hook |
Recording | |
Sampling / Averaging / Logging | 128 times/per period - 1 measurement/s - from 1 min to 60 min |
Memory | SD card 4GB per measurement total 32 GB) |
Communication | Bluetooth® (Class 2), Ethernet, USB |
Drive voltage | 110 V - 250 V (+ 10%, - 15 %) at 50-60 Hz & 400 Hz |
Security | EN 61010 600V KAT IV – 1000V KAT III |
Mechanical Specifications | |
Size | 256 x 125 x 37 mm without clamps |
Weight | 950 g |
Enclosure | IP54 - UL |