Bollmann wood moisture meter
Wood moisture meter with adjustable wood type and wood temperature
- Moisture content measurement in wood
- Impact hammers are purchased separately
5 415:-
Finns i lager
Finns i lager
Bollmann wood moisture meter H-DI
A more advanced moisture meter with the ability to set both wood type and wood temperature, giving the best accuracy. The separately ordered hammer sensor is very robust and makes it easy to drive in and knock out the 45 mm long measuring pins.
Included in delivery
Bollmann wood moisture meter H-DI
Similar products
Celsicom THC600B – internal sensor for temperature, air pressure, humidity and CO2
Directly connected carbon dioxide, air pressure, humidity and temperature monitoring
- Internal sensors for carbon dioxide, air pressure, humidity and temperature
- Measurement range: 0–10000 ppm CO2, -30 to +70°C, 260 to 1260 mbar absolute pressure, 0–100 %RH
- Low price on unlimited cloud storage
Celsicom V600 – reference sound level meter for ventilation tuning
Mobile connected measuring instrument for time-efficient ventilation adjustment
- Easy to use - just connect the meter to the reference device and it's ready to start measuring
- Shows the reference device flow as a percentage of the designed flow (according to the proportionality principle)
- Can display flow in l/s or m³/h and pressure in Pa.
- You simply enter the values of the reference actuator + additional actuators (tuning values) in your mobile browser
Surface temperature sensor NTC – with TUC contact
Waterproof surface temperature sensor with flat measuring tip for flat surfaces.
- NTC temperature sensor
- Measurement accuracy up to ±0.2 °C
- Ideal for measurements on refrigeration systems, in cold stores/rooms or outdoors
- Measuring range: -50 to +150 °C
Corkscrew sensor NTC for food – with TUC contact
Robust sensor for frozen foods, with corkscrew tip.
- NTC temperature sensor
- Can be screwed directly into frozen foods, no pre-drilling required
- Measuring range: -50 to +140 °C
- Complies with EN 13485 and HACCP
Robust food insertion sensor NTC with TUC connector
Robust food insertion sensor with special handle, IP65, reinforced cable (PUR) and reinforced protection against deformation. Ideal for the charcuterie industry.
- Measuring range: -25 to +150 °C
- EN 13485 and HACCP compliant
Stainless steel NTC waterproof plug-in sensor with TUC connector
Waterproof food sensor (IP 67), made of stainless steel.
- NTC temperature sensor
- Heat-resistant sensor cable
- Measuring range: -50 to +150 °C
- EN 13485 and HACCP compliant, water protected to IP 67
Stainless steel NTC insertion sensor with TUC contact
Waterproof food sensor (IP 65), made of stainless steel.
- Precision NTC sensor: For accurate temperature measurements
- Fast response time: only 8 seconds for direct reading
- Measuring range: -50 to +150 °C, making it versatile for different applications
- Hygienic stainless steel: Waterproof to IP65 standard for safe and durable use
testo 110 Food – food thermometer with app connection
With the testo Smart app, the testo 110 Food becomes an indispensable measuring instrument for accurate and efficient temperature measurements in the food sector.
- Easy, fast and accurate temperature measurement including seamless documentation via the testo Smart app
- Universal measurements with and without app and own measurement program for (critical) control points (CP/CCP)
- Versatility: suitable temperature probes for all applications
- Easy handling: intuitive design and user-friendly operation
testo 104-IR BT – IR insertion thermometer with app connection
The testo 104-IR BT insertion thermometer with integrated IR sensor is a versatile measuring instrument for quick and reliable temperature checks.
- Measure surface and core temperature with intuitive functions and seamless documentation via the testo Smart app
- The app helps you with the measurement, especially of (critical) control points (CP/CCP), but you can also measure without the app
- Flawless documentation via the testo Smart app
- Traceable measurement data for regulatory requirements and internal quality assurance
testo 270 BT – fryer oil meter with app connection
Instrument for measuring fryer oil quality, with seamless documentation via the testo Smart app
- Measurement possible with or without app. The app's frying oil measurement program helps you with the measurement and ensures error-free, digital documentation
- Measurement data tracking: CSV data export or professional reports in PDF format (incl. signature & comment function) for regulatory requirements and internal quality assurance
- Measuring directly in hot oil
- Independent on-site calibration with reference oil, via the testo Smart app
CA PEL 113 – power and energy logger with WiFi
Monitor your electricity network, your consumption and check your energy costs.
- Measures, among other things, current, voltage, energy and all effects on 1- or 3-phase installations.
- Wi-Fi, Ethernet, USB and memory cards
- Overtone analysis up to the 50th overtone
Impact hammer for wood moisture meters – standard
Bollmann impact hammer HY 2.0 (standard). Powerful impact hammer for moisture content measurement in wood. Can be used with Protimeter wood moisture meters with cable. The HY 2.0 hammer is robust and makes it easy to drive in and knock out the measuring pins. Available to supplement with longer pins.
Promotional package with thermal imaging camera and Blower Door
Combine with a thermal imaging camera!
- PROMOTIONAL PRICE (you save 4 985:-)
- Blower Door retrotec 5100 (included)
- Thermal imaging camera testo 868s (included)
- Basic course in thermography (included)
- Airtightness testing course (included)
Protimeter SurveyMaster BLD5375
Ny förbättrad version av Protimeter Surveymaster för snabba och noggranna fuktmätningar.
- Enkel att använda
- Erbjuder snabb fuktanalys i byggnader
- Direkt visning av mätresultat i många olika byggmaterial
- Beröringsfri mätning påverkas inte negativt av ytfukt
Stor väskmodell för upp till 11 givare
- Praktisk förvaringsväska för alla SmartProbes: testo 115i (2x), testo 405i, testo 410i, testo 510i, testo 549 (2x), testo 605i (2x), testo 805i och testo 905i
- Utsidan: slagtåligt, flexibelt hårt skal med dragkedja
- Insidan: skyddande skuminsats med exakt passformade fack för varje givare
- Kompakta mått: 400 x 290 x 80 mm
Camera probe for videoscope (spare part)
Camera probe for 9 mm video endoscope (spare part). Please note that this is an item sold at a reduced price as is and is not covered by normal warranties.
Air flow measurement nozzle
testovent 415, flow measurement support over nozzle, Ø 210 mm/210x210 mm, incl. case. Please note that this is an item sold at a reduced price as is and is not covered by normal warranties.
Video endoscope with swivel camera
This 5.8 mm video endoscope with 5-inch full-color display allows you to see and inspect hard-to-reach areas. Please note that this is an item sold at a reduced price as is and is not covered by normal warranties.
Celsicom THR600 – internal radon/temperature/humidity sensor
Mobile-connected radon, humidity and temperature monitoring
- Measurement range: 0-4000 Bq/m3, -30 ... +70°C, 0 ... 100 % RH
- Meets the Swedish Radiation Safety Authority's requirements for radon measurements in workplaces.
- AC adapter included
- Low price on unlimited cloud storage
testo 405i – wireless hot wire sensor
Compact sensor for air speed, temperature and airflow
- 0... 30 m/s (hot wire)
- -20... +60 °C (NTC)
- Telescopic tube, can be extended to 400 mm
Measuring stand
Measuring stand for testo 400/440 for comfort level/indoor climate measurements with sensor placement according to standard (incl. bag with space for global sensors 0602 0743). Please note that this is an item sold at a reduced price as is and is not covered by normal warranties.
Hammer sensor for moisture content measurement – extra robust
Hammer sensors with insulated pins and a measuring depth of 40 mm. The sensor has a heavier handle which makes it easier to insert the pins. Intended for depth measurement in wooden structures such as studs and joists. A smooth and very robust hammer sensor. Suitable spare measuring tips 10-pack art.no. 3560 0107 and 3560 0110 Please note that this is an item sold at a reduced price as is and is not covered by normal warranties.
testo 425 – hot wire sensor 7.5 mm
Air flow meter with telescopic sensor for accurate measurements in air conditioning and ventilation systems.
- Fast air flow and air velocity measurements in ventilation ducts.
- Flexible duct measurements with cable-connected telescopic sensors (maximum length: 820 mm).
- Settings, measurement data, graphs and the mobile as a second screen with the testo Smart app.
- Automatic calculation of time and point averages.
testo 316-4 – measuring set 2 for ammonia
Leak detection of ammonia (NH3)
- Extremely high sensitivity of g3g/a allows detection of even the smallest leaks
- Light and sound alarms for optimal leakage detection
- Permanent sensor control that ensures your work is both safe and fast
testo 400 – climate instrument for ventilation and indoor climate
Climate instrument for all ventilation and indoor climate professionals with a large touch screen.
- Shows the air flow rate in l/s or m3/h
- Integrated rear/front cameras (8 megapixel / 5 megapixel)
- Highly accurate and position-independent differential pressure sensor
- High quality digital sensors, both wireless and wired.
USB-adapter med kabel
Använd nätaggregatet med mikro-USB för att förse ditt mätinstrument med ström (t.ex. testo 400, testo 300). Tack vare de olika kontakttyperna som medföljer är adaptern även lämplig för internationell användning.
-
För extern strömförsöjning
-
230 V AC / 5 V DC (2 A)
-
Micro-USB-kabel
testo 410-2 – vane anemometer with moisture sensor
Vane anemometer that measures air speed, air temperature and humidity.
- Calculation of time average
- Hold function and min/max values
- Calculation of wind chill for outdoor measurements
- Integrated sensor for measuring air humidity
Turbulence degree and temperature transducers
Drafts are the most common cause of indoor climate complaints. Use the drag sensor to determine turbulence in accordance with EN 13779. Turbulence corresponds to the degree of fluctuation in air speed over time. The sensor can also measure temperatures up to +50 °C. The sensor is equipped with a telescope, which can be extended to a maximum of 820 mm.
- Non-directional flow measurement
- High accuracy even at low flow rates
- Integrated temperature measurement
testo 550i – measuring set with sensor and case
App-controlled manometer stand with wireless sensors and case
- Everything from measurement to documentation, with the testo Smart app on your smartphone
- The smallest digital manometer stand on the market
- Maximum reliability thanks to an extremely robust instrument housing with protection class IP54
testo 565i – smart vacuum pump 198 l/min
Fully automated vacuum extraction process with integrated hold test.
- PROMOTION! Until 31/12 2024, a vacuum sensor testo 552i is included with the purchase of a vacuum pump
- Safe use even with flammable refrigerants class A3 and A2L
- Manage measurements with the testo Smart app
- Easy oil change and quick oil level assessment with sight glass
- Non-return valve to prevent vacuum loss in case of power failure
Gasket for vacuum sensor
Black gasket for testo 552i and vacuum sensor for testo 557. Sold by the piece.
testo 565i – smart vacuum pump 283 l/min
Fully automated vacuum extraction process with integrated hold test.
- PROMOTION! Until 31/12 2024, a vacuum sensor testo 552i is included with the purchase of a vacuum pump
- Safe use even with flammable refrigerants class A3 and A2L
- Manage measurements with the testo Smart app
- Easy oil change and quick oil level assessment with sight glass
- Non-return valve to prevent vacuum loss in case of power failure
Spare part sensor 2 m for Celsicom TH601B
Spare part sensor (2 meters) with loose cable ends for temperature and humidity for Celsicom TH601B, including building humidity adjustment. ATTENTION! Unique ID number provided on separate label needed for pairing the sensor with the Celsicom box in the Celsiview cloud service.
Spare part sensor 0.4 m for Celsicom TH601A
Spare part sensor with loose cable ends for temperature and humidity for Celsicom TH601A, including building humidity adjustment. ATTENTION! Unique ID number provided on separate label needed for pairing the sensor with the Celsicom box in the Celsiview cloud service.
Set of pump and sealing balloons
The balloons are placed in openings of air diffusers and inflated quickly to block ventilation ducts during tightness measurements. This is a convenient and effective solution that saves a lot of time compared to taping, which is a common method of sealing donuts.
- 10 balloons (Diameter max 250 mm, min 100 mm. Thickness 1 mm)
- Pump
- Valve
Stos 1200 x 1200 mm
Extra luftflödesstos till testo 420 med öppning 1200 x 1200 mm. Integrerad luftflödesriktare.
Charger for 4 AA batteries
External charger for rechargeable AA batteries (4 included), 100 to 240 V, 300 mA, 50/60 Hz, 12VA/instrument. ATTENTION! This is an expired item in mint condition sold at a reduced price with a limited warranty.
testo 6457 – flow transmitter 8 … 27 450 m³/h
Flow measurement - 8 ... 27 450 m³/h
- Suitable for large pipe diameters DN 65 - 250
- Direct compressed air measurement with simultaneous display of three measured values thanks to standard TFT display
- The sensor can be removed under pressure
testo 6456 – flow rate transmitter 9 … 27 590 m³/h
Flow rate measurement - 9 ... 27 590 m³/h
- Suitable for large pipe diameters DN 65 - 250
- Direct compressed air measurement with simultaneous display of three measured values thanks to standard TFT display
- Dual analog output, or pulse and analog output
testo 6621 – moisture transmitter for channels without display
Testo's highly accurate and long-term stable moisture sensor
- Easy and safe handling
- Measuring range of moisture: 0...100%.
- Measuring range temperature: 0... +60°C
testo 6621 – moisture transmitter for wall without display
Wall-mounted humidity transmitter with testo's highly accurate and long-term stable humidity sensor.
- Easy and safe handling
- Measuring range moisture: 0...100%.
- Measuring range temperature: 0... +60°C
testo 6621 – moisture transmitter for channels with display
Humidity transmitter for duct mounting with display
- Testo's highly accurate and long-term stable moisture sensor
- Measuring range of moisture: 0...100%.
- Measuring range temperature: 0... +60°C
testo 6621 – wall moisture transmitter with external sensor
Wall-mounted humidity transmitter with external sensor and display
- External sensor - benefit of faster response time and easier calibration
- Measuring range of moisture: 0...100%.
- Measuring range temperature: 0... +60°C
Air and liquid temperature sensor – 2 m (type K)
Temperature sensor with Teflon-insulated cable 2 meters, Tmax = +250 °C, thermocouple type K.
Leaf-thin surface temperature sensor type K
Type K surface temperature sensor with leaf-thin contact surface and fast response time, for reliable temperature measurements - even in hard-to-reach places. Measuring range up to +300°C. Please note that the item is in new condition, but is sold at a reduced price and with a limited warranty.
Current clamp for PEL 103
Flexible AC current clamp for measurements from 100 mA to 10 000 A suitable for PEL 103. IEC 61010 1000V CAT III and 600V CAT IV
- Ø diameter 70 mm
- Length 250 mm
Low temperature sensor type T
Stainless steel rod 1 m long with 2 m silicone cable and fitted mini plug. Suitable for measuring in freezers down to -200 degrees e.g.. in liquid nitrogen.
BLUETOOTH/IRDA printers
BLUETOOTH/IRDA printer including paper roll, rechargeable batteries and charger. Please note that this is an expired item sold as is at a reduced price and is not covered by normal warranties.
Flue gas sensor for testo 327/330
Flue gas sensor with flexible (bendable) probe tube for measuring in hard-to-reach places. Suitable for testo 330/327.
- Probe length: 330 mm
- Probe diameter: 10.5 mm
- Tmax: 180°C (briefly 200°C)
- Max bending radius: 90°
Hot wire sensor (Ø 7.5 mm) with fixed cable (demo)
Practical hot wire sensor with temperature sensor for testo 400 and testo 440. The sensor end has a diameter of 7.5 mm which means it fits most pre-drilled measuring holes in the ventilation ducts. Integrated temperature measurement and absolute pressure compensation for accurate measurement results. Please note that this is a demo item sold at a reduced price and is not covered by normal guarantees.
testo 512-0 – differential pressure meter 0…200 Pa | 2…17,5m/s
- Over/under/differential pressure
- Air velocity calculation when measuring with prandtl tubes
- Adjustable damping
- Density compensation
Protective cap for testo 605-H1
Have you lost the protective cap for your testo 605-H1? Order a new one here!
PVC insulated wire sensor – 0.5 m
Wire sensor 0,5 m, PVC insulated, Tmax = 105 °C, thermocouple type T.
Practical aluminum case
Transport case for measuring instruments, sensors and accessories.
Climate sensor 6604 with cable (demo)
Climate sensor with cable for measuring relative humidity. Please note that this is a demo copy sold at a reduced price as is and is not covered by normal warranties.
testo 174T – mini temperature logger
Mini data logger for temperature.
- Compact format 36x60x19 mm
- Waterproof according to protection class IP65
- Measuring range -30... 70°C
TE adapter type T mini plugs male to female 5 m
5 meter TE adapter type T with mini-plug male to mini-plug female.
TE adapter type T mini plugs male to female 3 m
3 meter TE adapter type T with mini-plug male to mini-plug female.
testo 883-2 – measuring set with wide-angle and telephoto lenses plus accessories
This thermal imaging camera is designed for building and energy consultants.
- IR resolution of 320 x 240 pixels
- Incl. wide-angle lens (42°) and telephoto lens ( 12°)
- Full control with manual focus and interchangeable optics
- Thermography - basic course included!
testo 883-2 – with wide-angle lens and accessories
This thermal imaging camera is designed for building and energy consultants.
Kampanj! Just nu ingår batteriladdare och ett extra laddningsbart batteri i ditt köp.
- IR resolution of 320 x 240 pixels
- Incl. wide angle lens (42°)
- Full control with manual focus and interchangeable optics
- Thermography - basic course included!
testo 570s – vacuum measuring set with clamp ammeter
Digital pressure gauge stand in a smart measurement set with wireless vacuum sensors, pipe temperature sensors, and seaweed amperemeter.
- Long-term measurement for up to 72 hours
- Unbeatable battery life of up to 360 hours
- Fast error analysis with the testo Smart app
testo 830-T2 – Measurement kit for temperature measurement in asphalt
Measurement set including robust insertion sensor type K
- Combined instrument
- Input for standard temperature sensors
- Clear 2-point laser sight.
Cable for Celsicom TC603
Cable for suspension of the Celsicom TC603 concrete computer.
Transport bag for airflow instruments
Transport case for storing measuring instruments, sensors and accessories. Dimensions: w=52 cm, l =41 cm; h=16 cm.
Transport bag for indoor climate instruments
Transport case for storing measuring instruments, sensors and accessories. Dimensions: w=52 cm, l =41 cm; h=21 cm.
Teflon filter
Teflon filter threaded on the humidity sensor. Protects the sensor from dust, dirt and free water. Outer Ø=11 mm, Inner Ø=8 mm, l= 20 mm
Robust insertion sensor for food
Insertion sensor for temperature measurement in food. The sensor has a special ergonomic handle and the sensor type is thermocouple type K. Please note that this is a discontinued item sold at a reduced price as is and is not covered by normal warranties.
Corkscrew type sensor for frozen products
Corkscrew type sensor for frozen products. This is a plug-in sensor that fits the testo 105 food thermometer. Please note that this is a demo copy sold at a reduced price as is and is not covered by normal warranties.
testo 6681 – moisture transmitter for sensitive environments
Please note that this is a demo copy sold at a reduced price as is and is not covered by normal warranties.
- -40...180°C
- 0...100%RH
- Interchangeable sensors
Kapton insulated thin wire sensor type T – 10 m
Handy sensor for quick air and surface temperature measurements
- Super thin wire sensor 10 meters
- Kapton insulated
- Wide temperature range
- Thermocouple type T
Kapton insulated thin wire sensor type T – 5 m
Easy-to-use sensor for quick air and surface temperature measurements
- Super thin wire sensor 5 meters
- Kapton insulated
- Wide temperature range
- Thermocouple type T
Kapton insulated thin wire sensor type T – 3 m
Easy-to-use sensor for quick air and surface temperature measurements
- Super thin wire sensor 3 meters
- Kapton insulated
- Wide temperature range
- Thermocouple type T
Kapton-insulated thin wire sensor type T – 2 m
Easy-to-use sensor for quick air and surface temperature measurements
- Super thin wire sensor 2 meters
- Kapton insulated
- Wide temperature range
- Thermocouple type T
TUC extension cable 10 m
Extension cable for testo 150 TUC4
- 10 meters
- -30 °C to +50 °C
TUC extension cable 6 m
Extension cable for testo 150 TUC4
- 6 meters
- -30 °C to +50 °C
TUC extension cable 2 m
Extension cable for testo 150 TUC4
- 2 meters
- -30 °C to +50 °C
testo UltraRange module for base
Module component for base station or gateway for communication via radio in the testo Saveris measuring system.
- Radio frequency: 868 MHz
- Transmission interval: 1 min ... 24 hours
- Protection class: IP67
Celsicom mobile connection 12 months
Celsicom - Mobile connection 12 months
Cloud service – ventilation adjustment 12 months – bag 2
This cloud service is for those who already have at least 1 Celsivent bag in the same office. The Celsiview/CelsiVent cloud service reads real-time measurement data from the reference drone meter. Using a standard smartphone, you can follow the reference device's measurements during ventilation adjustments in real time. On the web page on the phone, you enter the K-factor and design flow for the reference actuator. It is also possible to enter six additional projected flow values for devices to be adjusted in the installation. The phone displays the flow of the reference actuator as a percentage of the design flow and the flow to which the other actuators should be adjusted. If there is a change in pressure, the values are recalculated within seconds, so you always have up-to-date measurement data from the reference device. The interface can be set to display the flow rate l/s or the pressure in Pa on the donors.
H2 compensated CO measuring cell
CO measuring cell for testo, H2 compensated, 0-8000 ppm. Suitable for testo 330.
CO measuring cell for testo 320
CO measuring cell for testo 320
Celsicom THC600 – internal temperature/humidity/CO2 sensor
Directly connected carbon dioxide, humidity and temperature monitoring
- Internal sensors for carbon dioxide, air pressure, humidity and temperature
- Measurement range: 0-5000 ppm CO2, -30 to +70°C, 260 to 1260 mbar, 0-100 % RH
- Low price on unlimited cloud storage
testo 560i – Refrigerant scale without solenoid valve
Measurement kit with bag for automatic filling of chillers and heat pumps
- Wireless connection and function with the Testo manometer stand and the testo Smart app via Bluetooth
- All measured values during the filling process can be easily read and saved in the testo Smart app.
- Practical thanks to compact housing, low weight, practical carrying handle and robust shoulder bag
Magnetic valve
Smart solenoid valve for the testo 560i refrigerant scale
- Particularly robust thanks to IP54
- Long Bluetooth range of up to 150 m together with a Testo manometer stand (alone up to 50 m).
- Long battery life of over 60 hours and replaceable 9 V block battery
testo 560i – Refrigerant scale with solenoid valve
Measuring kit with bag for automatic filling of chillers and heat pumps
- Automatic and precise charging of refrigerant to a set target value for weight, superheat or subcooling thanks to an intelligent solenoid valve.
- Wireless connection and function with the Testo manometer stand and the testo Smart app via Bluetooth
- All measured values during the filling process can be easily read and saved in the testo Smart app.
- Practical thanks to compact housing, low weight, practical carrying handle and robust shoulder bag
testo 545 – lux meter
Simple, fast and accurate measurement of illuminance (Lux) according to the V-lambda curve for all common light sources.
- Wide range of applications thanks to LED compatibility (except single-color blue LED)
- Quick settings, history graphs, mobile as a second screen and measurement data memory in the testo Smart app.
- An audible alarm warns if a limit value is exceeded.
testo 535 – CO2 meter
Simple, fast and accurate determination of carbon dioxide content.
- Connection to the testo Smart app
- The mobile phone as a second screen
- Storage and documentation of the measured values directly in the app.
Lithium battery (AA)
AA-type lithium battery, 1.5 volts. Can be used, for example, to operate the DP600 and THC600 meter boxes in the Celsicom Easy Connect series. Sold by the piece.
TopSafe for testo 922/925/110/521
Protective case for testo 110, 922 and 925 as well as testo 521-1 and testo 521-2 (new models from 2023)
- Protection class IP65 with sensor connected.
- Protects the instrument from shocks, dirt and water.
- With mounting magnets and table stand.
testo 440 – with high accuracy insertion sensor ±0.15 °C
Multi-instrument with highly accurate digital plug-in sensor
- Measurement range: -100 ... +400 °C
- Accuracy: ±0.15 °C
- Intelligent calibration concept
Tiny S – smoke machine
Tiny S is a smoke machine with small dimensions, low weight and minimal liquid consumption.
- Heating time 1 second
- Continuous smoke generation
- Adjustable smoking time
- The evaporator can be easily replaced if necessary
FP-Smoke 202 – powder smoke bottle with spout
Powder smoke bottle for airflow analysis in sensitive environments
- Powder-based
- Contains no chlorides
- No substances hazardous to health or the environment
FP-Smoke 201 – powder smoke
Powder smoke for airflow analysis in sensitive environments
- Powder-based
- Contains no chlorides
- No substances hazardous to health or the environment
Splintax 25 – smoke producing matches
Smoke-producing matches - box of 25 matches
- For airflow analysis
- For tightness checks
- For testing smoke detectors etc.
Björnax smoke pen
The Björnax smoke pen provides a stable, continuous column of smoke where you determine the amount of smoke.
- Non-turbulent = very little thermal impact
- Reveals the slightest leakage or air movement
- Contains no harmful or corrosive substances
testo 270 – NSF certified frying oil meter
Frying oil meter for maximum use of frying oil. The oil is changed when the limit value is reached.
- High food safety with NSF certification
- Avoid health risks or penalties due to exceeded quality limits
- Efficient and fast on-site measurement avoids expensive laboratory measurements.
- Set the ideal frying temperature
Thermax – temperature indicator +249 … +280°C
Self-adhesive temperature indicators with quick reaction time
- 5 points
- Irreversible color change
- Accuracy ±1 %
Thermax – clock indicator +40 … +54°C
Self-adhesive clock indicators with split-second reaction time
- 5 points
- Only Ø 15 mm
- Clear indication of maximum temperature
- Accuracy ±1°C
Thermax – temperature indicator +37 … +65°C
Self-adhesive temperature indicators with fast reaction time.
- 8 points
- Irreversible color change
- Reaction time about 1 sec
Thermax – clock indicator +143 … +166°C
Self-adhesive clock indicators with split-second reaction time
- 5 points
- Only Ø 15 mm
- Clear indication of maximum temperature
- Accuracy ±1%
Thermax – clock indicator +171 … +193°C
Self-adhesive clock indicators with split-second reaction time
- 5 points
- Only Ø 15 mm
- Clear indication of maximum temperature
- Accuracy ±1%
Thermax – temperature indicator +71 … +110°C
Self-adhesive temperature indicators with fast reaction time.
- 8 points
- Irreversible color change
- Reaction time about 1 sec
Thermax – clock indicator +60 … +82°C
Self-adhesive clock indicators with split-second reaction time
- 5 points
- Only Ø 15 mm
- Clear indication of maximum temperature
- Accuracy ±1°C
Thermax – clock indicator +199 … +224°C
Self-adhesive clock indicators with split-second reaction time
- 5 points
- Only Ø 15 mm
- Clear indication of maximum temperature
- Accuracy ±1%
Thermax – temperature indicator +116 … +154°C
Self-adhesive temperature indicators with quick reaction time
- 8 points
- Irreversible color change
- Reaction time about 1 sec
Thermax – temperature indicator +160 … +199°C
Self-adhesive temperature indicators with fast response time
- 8 points
- Irreversible color change
- Reaction time about 1 sec
Thermax – clock indicator +232… +260°C
Self-adhesive clock indicators with split-second reaction time
- 5 points
- Only Ø 15 mm
- Clear indication of maximum temperature
- Accuracy ±1%
Thermax – clock indicator +88 … +110°C
Self-adhesive clock indicators with split-second reaction time
- 5 points
- Only Ø 15 mm
- Clear indication of maximum temperature
- Accuracy ±1°C
Dish temperature indicators
The TDI temperature indicator is an easy way to check temperatures in dishwashers.
- Easy control of the achieved temperature
- Resistant to dishwashing chemicals
- Self-adhesive
Thermax – clock indicator +116 … +138°C
Self-adhesive clock indicators with split-second reaction time
- 5 points
- Only Ø 15 mm
- Clear indication of maximum temperature
- Accuracy ±1%
Thermax – temperature indicator +204 … +260°C
Self-adhesive temperature indicators with fast reaction time
- 9 points
- Irreversible color change
- Reaction time about 1 sec
- Accuracy ±1 %
DucTester 350x – leak testing of ventilation ducts
Tightness tester for ventilation ducts
- Color-coded channels
- Everything you need is included
- Fast assembly and disassembly
testo 6383 – with hygienic front panel
Installed in cleanroom applications and various hygiene zones in e.g. hospitals.
- Hygienic front panel for reading in clean zone
- Display with alarm indication (optional)
- No zero point drift thanks to automatic zero adjustment function
testo 6381 – for cleanrooms and hygiene zones
For cleanroom applications and different hygiene zones in e.g. hospitals.
- Zero in zero-point operation thanks to automatic zeroing
- Effective overpressure protection
- Measures very low differential pressures (minimum measuring range 0...10 Pa)
testo 6321 – accurate pressure/flow/velocity transmitter
For applications such as air conditioning and ventilation
- No zero-point operation thanks to automatic zeroing
- Can be supplied with several different pressure ranges
- High long-term stability and repeatability
testo 6351 – transmitter for low differential pressures
Units: volume flow, flow rate, differential pressure.
- No zero-point operation thanks to automatic zeroing
- Effective overpressure protection
- High long-term stability and repeatability
testo 6651 – moisture transmitter for sensitive environments
Moisture transmitter with Testo's highly accurate and long-term stable moisture sensor
- Robust precision transmitter
- -30...120°C
- 0...100%RH
testo 6681 – moisture transmitter series for sensitive environments
For monitoring and controlling sensitive environments in process engineering contexts
- -40...180°C
- 0...100%RH
- Interchangeable sensors
testo 6631 – moisture transmitter for greenhouse applications
Especially for monitoring critical environments in greenhouses
- Testo's highly accurate and long-term stable moisture sensor
- -10...60°C
- 0...100%RH
testo 6621 – wall-mounted moisture transmitter with display
Wall-mounted humidity transmitter with display
- Testo's highly accurate and long-term stable moisture sensor
- Measuring range moisture: 0...100%.
- Measuring range temperature: 0... +60°C