testo 440 dP – differential pressure and airflow measurement kit
Measurement set with testo 440dP for measuring differential pressure, air velocity, air flow and air temperature on air diffusers and in ducts.
- Ventilation course included! Valid for purchase by February 10
- Bluethooth handle for sensors
- Vane wheel sensor with 100 mm diameter
- Hot-wire sensor with temperature and humidity sensor
- Telescope and 90° angle
18 985:- exkl. moms
Delivery time: 5-10 working days
Delivery time: 5-10 working days
testo 440 – combined pressure and airflow measurement kit with Bluetooth
This measurement set includes the testo 440 dP ventilation and indoor climate meter. It can be connected to a wide range of digital sensors, testo SmartProbes and many other temperature sensors. In addition to the features of the testo 440, this instrument has an integrated differential pressure sensor. Thanks to it, you can also perform measurements over filters and use Pitot tubes (Prandtl tubes). The instrument has clearly structured measurement menus for duct/vent volume flow, k-factor, turbulence degree, cooling/heating load, moisture damage risk indication and logging function. These menus allow you to complete measurement tasks faster, more efficiently and more reliably. Reports can be exported as Excel files via the USB interface or printed on site.
Avoid cable clutter thanks to the universal handle with Bluetooth. This is a practical and affordable measurement kit for all relevant parameters in ventilation ducts and air vents/roof vents. The instrument, vane wheel and hot wire sensor are extremely easy to use and very handy when adjusting ventilation systems. The calibration concept is also very intelligent. You only need to send in the sensor part for calibration, so you can keep the handle and the instrument.
Included in delivery
- The testo 440dP multi-instrument
- Universal handle with Bluetooth
- Hot wire sensor incl. temperature and humidity sensor
- Vane wheel sensor with 100 mm diameter. incl. temperature sensor
- Telescope (1 m) and 90° angle to fit both sensors
- Combination case for testo 440 dP and multiple sensors
Kampanj! Nu ingår heldagskursen ”Ventilation – mät rätt” den 25 februari – utan extra kostnad. Antalet platser är begränsade och först till kvarn gäller. Gäller köp senast den 10 februari. Obs! Vi anordnar kursen om tillräckligt många har anmält sig.
| PROBES | See separate info on probes |
| INSTRUMENT | The data below refer to the instrument only |
| TEMPERATURE (NTC) | |
| Measurement range | -40 … 150 °C |
| Accuracy (±1 digit) | ±0.4 °C (-40 … -25.1 °C) ±0.2 °C (-25 … +74.9 °C) ±0.4 °C (+75 … +99.9 °C) ±0.5% of mv.. (rem. measuring range) |
| Resolution | 0,1 °C |
| TEMPERATURE (TE) | |
| Measurement range | -200 … +1 370 °C |
| Accuracy (±1 digit) | ±(0.3 °C + 0.1 % of mv.) |
| Resolution | 0,1 °C |
| TEMPERATURE Pt100 (with suitable sensor) | |
| Measurement range | See probe data |
| Accuracy (±1 digit) | See probe data |
| Resolution | See probe data |
| DIFFERENTIAL PRESSURE | |
| Measurement range | -150 … +150 hPa |
| Accuracy (±1 digit) | ±0.05 hPa (0 … +1.00 hPa) ±0.2 hPa + 1.5% of mv. (rem. measuring range) |
| Resolution | 0,01 hPa |
| SENSOR CONNECTIONS | |
| TE type K | 1 |
| NTC TUC / digital sensor with cable | 1 |
| Bluetooth sensor | 1 digital Bluetooth sensor or testo SmartProbe |
| GENERAL DATA | |
| Operating temperature | -20 … +50 °C |
| Storage temperature | -20 … +50 °C |
| Battery type | 3 AA batteries |
| Battery life | 12 hours (typical measurement) |
| Weight | 250 g |
| Size | 154 x 65 x 32 mm |
Digital comfort level probes
-
Lux sensor with fixed cable
4 615:- exkl. moms Art.nr 0635 0551Suitable for the testo 440 and testo 400 multi-instruments. -
IAQ sensor with fixed cable
6 485:- exkl. moms Art.nr 0632 1552Fixed cable IAQ sensor with temperature and humidity sensor. Suitable for the testo 440 and testo 400 multi-instruments. -
IAQ sensor with Bluetooth
6 965:- exkl. moms Art.nr 0632 1551CO2 sensor with Bluetooth and temperature and humidity sensor for testo 440 and testo 400. -
IAQ sensor (plug-in)
5 625:- exkl. moms Art.nr 0632 1550CO2 sensor with temperature and humidity sensor. Suitable for the testo 440 and testo 400 multi-instruments. Handles must be completed with this item, see accessories. -
Fixed cable pullers
11 980:- exkl. moms Art.nr 0628 0152Draft sensor for turbulence degree and temperature, for testo 440 and testo 400.
Digital air velocity probes
-
Hot body sensor (Ø 3 mm) with fixed cable
6 890:- exkl. moms Art.nr 0635 1051Hot body sensor with temperature sensor for testo 400 and testo 440. The sensor is not directional and has a sensor end of only 3 mm diameter. -
Hot wire sensor (Ø 7.5 mm) with fixed cable
6 095:- exkl. moms Art.nr 0635 1026Practical hot wire sensor with temperature sensor for testo 400 and testo 440. The sensor end has a diameter of 7.5 mm which means it fits most pre-drilled measuring holes in the ventilation ducts. Integrated temperature measurement and absolute pressure compensation for accurate measurement results. -
Fume cupboard sensor with fixed cable
8 930:- exkl. moms Art.nr 0635 1052Measures air speed and temperature, for testo 440 and testo 400. -
Vane sensor (Ø 16 mm) plug-in
7 725:- exkl. moms Art.nr 0635 9570Vane sensor with temperature sensor for testo 400 and testo 440. Adapter and handle must be completed with this item, see accessories. -
Vane sensor (Ø 16 mm) up to 1000 mm
10 355:- exkl. moms Art.nr 0635 9572Vane sensor Ø 16 mm with temperature sensor and fixed cable for testo 440 / 400. Equipped with a telescope that can be extended from 570 mm to 1 000 mm. -
Vane sensor (Ø 16 mm) with Bluetooth
10 675:- exkl. moms Art.nr 0635 9571Vane sensor Ø 16 mm with temperature sensor and Bluetooth for testo 400 and testo 440. Equipped with a telescope that can be extended from 570 mm to 1 000 mm. -
Vane sensor (ø 100 mm) with fixed cable
5 660:- exkl. moms Art.nr 0635 9432Vane sensor with fixed cable and temperature sensor, 100 mm diameter, for testo 440 and testo 400. -
Vane sensor (ø 100 mm) with Bluetooth
6 110:- exkl. moms Art.nr 0635 9431Vane sensor with Bluetooth and temperature sensor, 100 mm diameter, for testo 440 and testo 400. -
Vane sensor (ø 100 mm) plug-in
4 360:- exkl. moms Art.nr 0635 9430Vane sensor (plug-in) with temperature sensor, 100 mm diameter, for testo 440 and testo 400. Adapter and handle must be completed with this item, see accessories. -
High accuracy vane sensor (ø 100 mm) with fixed cable
10 700:- exkl. moms Art.nr 0635 9372Highly accurate fixed cable vane sensor with temperature sensor, 100 mm diameter, for testo 440 and testo 400. -
Highly accurate vane sensor (ø 100 mm) with Bluetooth
11 195:- exkl. moms Art.nr 0635 9371Highly accurate vane sensor with Bluetooth and temperature sensor, 100 mm diameter, for testo 440 and testo 400. -
Highly accurate vane sensor (ø 100 mm) plug-in
9 655:- exkl. moms Art.nr 0635 9370Highly accurate vane sensor (plug-in) with temperature sensor, 100 mm diameter, for testo 440 and testo 400. Adapter and handle must be completed with this item, see accessories. -
Hot wire sensor (ø 10 mm) plug-in
7 245:- exkl. moms Art.nr 0635 1570Hot wire sensor incl. temperature and humidity sensor. Length 230 mm. Adapter and handle must be completed with this item, see accessories. -
Hot wire sensor (ø 10 mm) with tiltable telescope
9 875:- exkl. moms Art.nr 0635 1572Hot wire sensor with fixed cable, incl. temperature and humidity sensor. Equipped with a telescope that can be tilted and extended from 570 mm to 1,000 mm. -
Hot wire sensor (ø 10 mm) with Bluetooth
10 150:- exkl. moms Art.nr 0635 1571Hot wire sensor with Bluetooth, incl. temperature and humidity sensor. Equipped with a telescope that can be tilted and extended from 570 mm to 1,000 mm. -
Vane sensors (Ø 16 mm) up to 850 mm
4 015:- exkl. moms Art.nr 0635 9532Vane sensor with Ø 16 mm with fixed cable for testo 440 and testo 400. Equipped with a telescope that can be extended from 300 mm to 850 mm. -
Hot wire sensor (Ø 10 mm) with telescope
3 215:- exkl. moms Art.nr 0635 1032Hot wire sensor with fixed cable for testo 440 and testo 400. Equipped with a telescope that can be extended from 300 mm to 850 mm. Integrated temperature measurement and absolute pressure compensation for accurate measurement results.
Digital moisture probes
-
Moisture sensor with fixed cable
2 075:- exkl. moms Art.nr 0636 9732Moisture and temperature sensor with fixed cable that fits both the testo 400 and testo 440 multi-instruments. -
Humidity sensor with Bluetooth
2 570:- exkl. moms Art.nr 0636 9731Moisture and temperature sensor with Bluetooth suitable for both multi-instruments testo 400 and testo 440. -
Humidity sensor (plug-in)
1 315:- exkl. moms Art.nr 0636 9730Moisture and temperature sensor (plug-in) for testo 440 and testo 400. Must be completed with handles. -
Highly accurate moisture sensor with fixed cable
6 140:- exkl. moms Art.nr 0636 9772Highly accurate moisture and temperature sensor with fixed cable for testo 440 and testo 400. -
Highly accurate moisture sensor with Bluetooth
6 550:- exkl. moms Art.nr 0636 9771Highly accurate moisture and temperature sensor with Bluetooth that fits both the testo 400 and testo 440 multi-instruments. -
Highly accurate moisture sensor (plug-in)
5 360:- exkl. moms Art.nr 0636 9770Highly accurate moisture and temperature sensor (plug-in) suitable for both the testo 400 and testo 440 multi-instruments. Must be completed with handles. -
Robust moisture sensor with fixed cable
6 885:- exkl. moms Art.nr 0636 9775Robust moisture/temperature sensor for temperatures up to +180°C, with fixed cable suitable for both the testo 400 and testo 440 multi-instruments.
NTC probes with TUC connector
-
Pipe temperature sensor (NTC) with replaceable measuring head and TUC connector
2 495:- exkl. moms Art.nr 0615 5605Pipe temperature sensor (pliers) with interchangeable measuring head, for pipe diameters 5-65 mm. For fast, accurate measurement of pipe surface temperature.- Measuring range from -50 to +120 °C
- The surface temperature sensor can be attached to pipes very quickly thanks to the quick coupling
- Replaceable measuring head
- Temperature sensor with precise NTC temperature sensor
-
Temperature sensor (NTC) with Velcro 75 mm
1 295:- exkl. moms Art.nr 0615 4611Temperature sensor with Velcro, for pipes with max diameter 75 mm.- With Velcro: makes it easy to attach the surface temperature sensor to pipes
- NTC temperature sensor with cable
- Measuring range: -50 to +70 °C
-
Waterproof insertion sensor NTC
1 005:- exkl. moms Art.nr 0615 1212Waterproof dip/plug-in sensor (NTC) for testo 440, testo 400 and testo 110 -
Air sensors
1 030:- exkl. moms Art.nr 0615 1712Robust affordable air sensor for testo 440, testo 400 and testo 110. Exposed sensor for fast response times. -
Pipe temperature sensor for pipes with diam. 6-35 mm
690:- exkl. moms Art.nr 0615 5505Clamp sensor for temperature measurement for testo 440/400/110. Suitable for pipes with diameters from 6 mm to 35 mm.
Thermocouple probes type K
-
Set including air, insertion and surface sensors
1 605:- exkl. moms Art.nr 0602 5093Air, insertion and surface sensors (thermocouple type K) A sensor set to perform temperature measurements in many different applications. Combine the temperature sensors (thermocouples type K, class 1) with a suitable measuring instrument and start the measurement.- Robust and fast immersion/insertable sensor (TE type K, class 1), measuring range -50 ... +400 °C, for temperature measurement in liquids and semi-solid materials.
- Rapid surface temperature sensor (TE type K, class 1) with spring-loaded thermocouple tip, measuring range -50 ... +350 °C, for temperature measurement on smooth and uneven surfaces, e.g., in the form of a thermocouple. on pipes
- Robust and fast air temperature sensor (TE type K, class 1), measuring range -50 ... +400 °C, for measuring ambient temperature as well as temperatures in ducts and air diffusers.
- Thanks to the proven quality and high durability, you can rely on your Testo temperature sensor in all conditions.
- Air sensor (TE type K, class 1)
- Dip/insert sensor (TE type K, class 1)
- Surface temperature sensor (TE type K, class 1)
-
Robust plug-in sensor type K
735:- exkl. moms Art.nr 0602 1293Robust and affordable standard sensor for dip and insertion measurements. -
Robust air sensor, suitable for air ducts
980:- exkl. moms Art.nr 0602 1793Robust and affordable air temperature sensor. Suitable for measurements in air ducts. -
Temperature sensors for air and liquids
2 035:- exkl. moms Art.nr 0602 0493Fast and thin sensor. Ideal for measuring temperature in both air and liquids. -
Very fast mini air sensor
235:- exkl. moms Art.nr 0602 064630 mm long Teflon-insulated wire sensor. Ideal for quick air temperature measurements. -
Accurate and fast immersion sensor
1 535:- exkl. moms Art.nr 0602 0593Accurate, thin sensor. For measurements in gas, air and liquid. The small diameter (1.5 mm) provides a very fast response time. -
Robust surface temperature sensor type K
980:- exkl. moms Art.nr 0602 1993Waterproof surface temperature sensor with flat measuring tip for flat surfaces. -
Fast surface temperature sensor
1 885:- exkl. moms Art.nr 0602 0393Fast surface temperature sensor with resilient thermocouple band. The design makes it suitable for measurements on uneven and curved surfaces. For short-term measurements up to 500 °C. -
Angled surface temperature sensor
2 290:- exkl. moms Art.nr 0602 0993Angled surface temperature sensor with resilient thermocouple band. Suitable even on uneven surfaces. Short-term measurement up to 500 °C. -
Sensors for surface measurement up to +1 000 °C
1 785:- exkl. moms Art.nr 0602 0693Accurate, waterproof surface temperature sensor with small flat measuring head for measuring on smooth surfaces, up to +1000°C. -
Mini temperature sensors for surface measurements
840:- exkl. moms Art.nr 0602 0092- Very affordable and fast sensor for measurement on surfaces
- Also as a spare measuring head for pipe sensors 0602 4592
-
Super fast needle sensor, no visible measuring holes
1 750:- exkl. moms Art.nr 0628 0026Waterproof, super-fast needle sensor for accurate measurements without visible measuring holes. Particularly suitable for foods such as hamburgers, steaks, pizzas, eggs, etc. -
Stainless steel insertion sensors for food
1 245:- exkl. moms Art.nr 0602 2292Waterproof food sensor (IP 65), made of stainless steel. -
Insertion sensor with Teflon cable Tmax +220°C
990:- exkl. moms Art.nr 0572 9001Plug-in sensor with 2 m Teflon-insulated cable Tmax +220°C. -
Rapid immersion/insertion sensor for gas, air and liquids
1 860:- exkl. moms Art.nr 0602 2693Fast immersion sensor for measurements in gas, air and liquids. -
Long immersion sensor with protection tube
1 505:- exkl. moms Art.nr 0628 1292Waterproof and robust dip/insert sensor with metal protection tube. Suitable for temperature control of frying oil etc. -
Temperature sensor with flexible probe
460:- exkl. moms Art.nr 0602 5792Flexible measuring tip, 500 mm long, Ø 1.5 mm -
Sensors for low temperatures
560:- exkl. moms Art.nr 0602 5793Flexible measuring tip, 500 mm long, Ø 1,0 mm. Suitable for temperature measurement in e.g. liquid nitrogen, low temperature freezing down to -196°C. The connector can withstand temperatures from -30 to +110 °C. -
Sensor with flexible measuring tip 500 mm
695:- exkl. moms Art.nr 0600 5793Flexible measuring tip TE type K normal contact (plug-in), Ø 3 mm, 500 mm long, for high temperatures +1100°C. ATTENTION! To use this sensor with most of our instruments, an adapter is needed. -
Probe with flexible measuring tip, 1 030 mm
775:- exkl. moms Art.nr 0600 5893Flexible measuring tip (plug-in), 1030 mm long, for high temperatures +1100°C. NOTE! To use this sensor with most of our instruments an adapter is needed. -
Robust compost sensor 1.25 meters
2 750:- exkl. moms Art.nr 0602 1250Long robust sensor specially developed for measurements in compost. 1.25 m long. -
Fiberglass insulated wire sensor 800 mm
305:- exkl. moms Art.nr 0602 0644Fiberglass insulated wire sensor, 800 mm long. For temperatures up to +400°C. -
Fiberglass insulated wire sensor 1500 mm
235:- exkl. moms Art.nr 0602 0645For temperatures up to +400°C. -
Wire sensor 1500 mm, PVC insulated
230:- exkl. moms Art.nr A10K-1,5-F11KXPlastic coated wire sensor, 1500 mm long. Tmax +105 °C. Suitable for measuring air temperature in premises, coolers and water temperature in dishwashers, etc. -
Wire sensor 5 meters, PVC insulated
295:- exkl. moms Art.nr A10K-5,0-F11KXPlastic-coated wire sensors. Tmax +105 °C. Suitable for measuring air temperature in rooms, refrigerators and surface temperature if the sensor is taped to the surface. -
Surface temperature sensor with magnet, up to 170 °C
2 475:- exkl. moms Art.nr 0602 4792Sensor with magnet for use on metal surfaces. Adhesive force approx: 20 N -
Surface temperature sensor with magnet, up to +400°C
2 745:- exkl. moms Art.nr 0602 4892Temperature sensor with magnet for higher temperature measurements on metal surfaces. Adhesive force approx: 10 N -
Pipe sensors for surface temperature measurement
1 045:- exkl. moms Art.nr 0602 4692Pipe sensor for surface temperature measurement on pipes with a diameter of 15-25 mm. Short-term measurements up to 130°C. Long term 100°C. -
Pipe sensor with velcro – Ø max 120 mm
735:- exkl. moms Art.nr 0628 0020Pipe sensor with Velcro, for temperature measurement on pipes with a maximum diameter of 120 mm. Up to 120°C. -
Pipe temperature sensor with interchangeable measuring head
2 085:- exkl. moms Art.nr 0602 4592Pipe sensor (pliers) with interchangeable measuring head, for pipe diameters 5-65 mm. Short-term measurements to +280°C -
Dual sensor with Teflon-insulated cable
755:- exkl. moms Art.nr 0628 7533Stainless steel dual sensor for measuring air, gas and liquid. -
Radiant heat sensor
5 520:- exkl. moms Art.nr 0602 0743Global sensor for measuring radiant heat. -
Compensation cable type K with PVC insulation (metric)
30:- exkl. moms Art.nr A82KPrice per meter. -
Kapton insulated thin wire sensor type K – 1.5 m
210:- exkl. moms Art.nr B08K-1,5-F11KXFlexible sensor for quick air and surface temperature measurements.- Super thin wire sensor 1.5 meters
- Kapton insulated
- Wide temperature range
- Thermocouple type K
-
Wire sensor TE type K, 5 meters, fiberglass insulated
315:- exkl. moms Art.nr C09K-5,0-F11KXWire sensor TE type K, 5 meters, fiberglass insulated -
TE wire type K 25 meters PVC
575:- exkl. moms Art.nr A10K-25Type K thermocouple wire on 25-metre rolls with PVC insulation -
TE wire type K 50 meters PVC
1 095:- exkl. moms Art.nr A10K-50Type K thermocouple wire in 50 meter rolls with PVC insulation. -
TE wire type K 100 meters PVC
1 995:- exkl. moms Art.nr A10K-100Type K thermocouple wire on 100-metre rolls with PVC insulation -
TE wire type K 25 meters fiberglass
595:- exkl. moms Art.nr C09K-25TE wire type K on a 25 meter roll with fiberglass insulation. -
TE wire type K 50 meters glass fiber
1 075:- exkl. moms Art.nr C09K-50Type K thermocouple wire on 50 meter rolls with fiberglass insulation. -
TE wire type K 100 meters glass fiber
1 795:- exkl. moms Art.nr C09K-100Type K thermocouple wire on 100 meter rolls with fiberglass insulation. Tmax 480 °C -
Durable grill sensor with steel cable
850:- exkl. moms Art.nr 1390 0460Durable grill sensor thermocouple type K suitable for testo 108, testo 925 and Armatherm, Eti, Greisinger, etc.- Steel cable with protective sheath withstanding Tmax +450°C
- Cable length 1,5 m. Cable is not waterproof (to consider when cleaning it)
-
Fast oven sensor with Teflon cable
730:- exkl. moms Art.nr 1390 2100Rapid oven sensor Ø 1.5 mm- Length 100 mm
- Thermocouple type K suitable for testo 108, testo 925 and Armatherm, Eti, Greisinger, etc.
- Teflon-insulated cable Tmax +210°C
-
Extremely thin and fast type K wire sensor
595:- exkl. moms Art.nr 1390 0345The wire sensor provides a very fast response and is suitable for measuring small volumes of liquid. The cable is extremely thin and flexible. -
Air and liquid temperature sensor – 2 m (type K)
950:- exkl. moms Art.nr 1390 3125Temperature sensor with Teflon-insulated cable 2 meters, Tmax = +250 °C, thermocouple type K.
Pitot tubes (prandtl tubes)
-
Measuring hook for ventilation devices
375:- exkl. moms Art.nr 2340 2009Measuring hook, approx. 200 mm long, Ø 2 mm, stainless steel, measures the static pressure in vents together with pressure sensors. -
Pitot tube 750 mm
1 095:- exkl. moms Art.nr 2340 7507Pitot tube (prandtl tube), 750 mm long, Ø 7 mm, nickel-plated brass, measures air speed together with pressure sensor. Tmax +300°C. -
Pitot tube 1500 mm
2 290:- exkl. moms Art.nr 2340 1507Pitot tube (prandtl tube), 1500 mm long, Ø 7 mm, stainless, measures air speed together with pressure sensor. Tmax +600°C. -
Pitot tube 170 mm – stainless steel
795:- exkl. moms Art.nr 2340 1702Pitot tube (prandtl tube), 170 mm long, Ø 2.5 mm, stainless steel, measures air speed together with pressure sensor. Tmax +600°C. -
Ps-Pipes for static pressure
370:- exkl. moms Art.nr 2340 2408Ps-Pipe, Stainless steel probe for measuring static pressure in ventilation systems. 250 mm long, Ø 2,5 mm. Tmax +600°C. -
Pitot tube 1000 mm
1 595:- exkl. moms Art.nr 2340 1007Pitot tube (prandtl tube), 1 000 mm long, Ø 7 mm, nickel-plated brass, measures air speed together with pressure sensor. Tmax +300 °C. -
Pitot tube 500 mm
995:- exkl. moms Art.nr 2340 5007Pitot tube (prandtl tube), 500 mm long, Ø 7 mm, nickel-plated brass, measures air speed together with pressure sensor. Tmax +300 °C. -
Pitot tube 350 mm
895:- exkl. moms Art.nr 2340 3507Pitot tube (prandtl tube), 350 mm long, Ø 7 mm, nickel-plated brass, measures air speed together with pressure sensor. Tmax +300 °C. -
Pitot tube 300 mm – stainless steel
695:- exkl. moms Art.nr 2340 3004Pitot tube, 300 mm long, Ø 4 mm, stainless steel, measures air speed together with pressure sensor. Tmax +600 °C.
Digital CO probes
-
CO sensor with fixed cable
4 685:- exkl. moms Art.nr 0632 1272CO sensor with fixed cable for testo 440 and testo 400. -
CO sensor with Bluetooth
5 125:- exkl. moms Art.nr 0632 1271CO sensor with Bluetooth for testo 440 and testo 400. -
CO sensor (plug-in)
3 850:- exkl. moms Art.nr 0632 1270CO sensor with plug-in connector for testo 440 and testo 400. Must be completed with handles.
Digital temperature probes
-
Digital Pt100 sensor with cable
2 995:- exkl. moms Art.nr 0572 2163Digital temperature sensor with TUC contact. Flat Teflon cable with a length of 1.3 meters. Measurement range: -85 ... +150 °C. -
Sensor with measuring range -80 … +300 °C ±0,05 °C
6 615:- exkl. moms Art.nr 0618 0275Highly accurate Pt100 digital insertion sensor for measurements in liquids and semi-solids with an accuracy up to ±0.05 °C. Measuring range -80 ... +300 °C. -
Sensor with measuring range -100 … +400 °C ±0.15 °C
3 420:- exkl. moms Art.nr 0618 0073Digital Pt100-type insertion sensor for measurements in liquids and semi-solids. Measuring range -100 ... +400°C. -
Digital air sensor (Pt100)
3 420:- exkl. moms Art.nr 0618 0072Robust, fast, digital air sensor of the Pt100 type. Measuring range -100 ... +400 °C. -
Digital sensor with glass coating (Pt100)
3 420:- exkl. moms Art.nr 0618 7072Glass-coated Pt100-type digital laboratory sensor for measurements in corrosive media. Cable length: 1.6 m. Measurement range -50 ... +400 °C. -
Digital flexible temperature sensor (Pt100)
7 120:- exkl. moms Art.nr 0618 0071Flexible Pt100 digital temperature sensor for measuring in hard-to-reach places and in liquids. Measuring range -100 ... +265 °C. -
Down to -100 °C (Pt100)
3 200:- exkl. moms Art.nr 8711 0005Our low temperature sensors allow for accurate control of your cooling processes. They can be used in freezers, liquid nitrogen refrigerators and cooling chambers, etc. These digital sensors can be individually calibrated without dismantling the measuring system. The sensors have a TUC connector and can thus be used with the Testo measuring system "testo Saveris" and also with instruments such as testo 400/440. Depending on customer requirements, the sensors are also available with the following adaptations:- other cable lengths
- other connectors
- other forms
- or according to other requests
- Temperature measurement down to -100 °C
- Flat cable that can be pulled through seals in hatches and doors
- Easy handling and installation
- Can be calibrated
testo SmartProbes
-
testo 915i – wireless air temperature sensor
1 250:- exkl. moms Art.nr 0563 3915Wireless thermometer with air sensor
- -50 ... +400 °C
- For use with type K thermocouple sensors
- Air temperature measurement in surroundings, ducts or vents
-
testo 915i – wireless dip/insert sensor
1 315:- exkl. moms Art.nr 0563 1915For measuring in liquids and semi-solid materials
- -50 ... +400 °C
- For use with type K thermocouple sensors
- Fast reliable measurement results
-
testo 915i – wireless surface temperature sensor
1 370:- exkl. moms Art.nr 0563 2915For use with Type K thermocouple sensors for temperature measurement on smooth and uneven surfaces.
- -50 ... +350 °C
- Fast reliable measurement results
- Create and send reports directly at the measurement site
-
testo 915i – wireless thermometer with wire sensor
1 165:- exkl. moms Art.nr 0563 4915Wire sensors for hard-to-reach measurement sites
- -50 ... +400 °C
- For use with type K thermocouple sensors
- Temperature measurement in places that cannot be accessed with standard hard sensors
-
testo 915i – Measurement set with air, insertion and surface sensors
2 195:- exkl. moms Art.nr 0563 5915Ideal for temperature measurements in many different applications
- -50 ... +400 °C
- For use with type K thermocouple sensors
- Surface temperature sensor, dip/insert sensor and air sensor included
-
testo 115i – wireless pipe temperature sensor
965:- exkl. moms Art.nr 0560 2115 02For the installation, servicing and troubleshooting of heating and cooling systems
- Measuring range -40 ... +150 °C
- For pipe diameters of 6-35 mm
- Up to 100 meters Bluetooth range between sensor and smartphone
-
testo 805i – wireless thermometer for IR measurement
1 255:- exkl. moms Art.nr 0560 1805Bluetooth thermometer for non-contact temperature measurement
- Measuring range -30 ... +250 °C
- Non-contact IR measurement of surface temperatures
- Simple pictorial documentation incl. measurement values
-
testo 605i – wireless moisture and temperature sensor
1 350:- exkl. moms Art.nr 0560 2605 02SmartProbes for measuring moisture and temperature
- 0 ... 100 %RH
- -20 ... +60 °C
- Bluetooth range up to 100 m
-
testo 510i – wireless differential pressure sensor
1 605:- exkl. moms Art.nr 0560 1510Measurement of gas flow, static pressure and air flow.
- -150 ... +150 hPa
- Measurement menu for pressure drop test incl.. alarm
- Magnetic mount for more secure attachment
-
testo 405i – wireless hot wire sensor
1 610:- exkl. moms Art.nr 0560 1405Compact sensor for air speed, temperature and airflow
- 0... 30 m/s (hot wire)
- -20... +60 °C (NTC)
- Telescopic tube, can be extended to 400 mm
-
testo 410i – wireless vane sensor
1 355:- exkl. moms Art.nr 0560 1410For measuring air velocity, air flow and temperature at air diffusers
- 0,4 ... 30 m/s (vane)
- -20 ... +60 °C (NTC)
- Measurement of air speed, air flow and temperature
-
Handle with Bluetooth
1 465:- exkl. moms Art.nr 0554 1111Handle with Bluetooth for plug-in sensors for testo 440. -
Handle with cable
1 005:- exkl. moms Art.nr 0554 2222Handle with cable for plugin sensor for testo 440. -
Telescopic extenders
2 305:- exkl. moms Art.nr 0430 0946This robust telescopic extension makes it easy to reach vents at high heights, with or without a spigot. Can be extended to 180 cm and used with transducers suitable for the testo 400 or testo 440. -
Telescope
2 100:- exkl. moms Art.nr 0554 0960Telescopic extender incl. 90 degree angle designed for air velocity sensors used with the testo 400 or testo 440. Can be extended from 37.5 cm to 100 cm. -
90° angle
770:- exkl. moms Art.nr 0554 0991Angle 90° for wing wheel sensor (100 mm) for testo 440. -
Adapters
770:- exkl. moms Art.nr 0554 2160Adapter for connecting the luff flow sensor to the testo 440 handle. -
Service bag for indoor climate equipment
2 580:- exkl. moms Art.nr 0516 4900Service bag for indoor climate equipment. Dimensions: 516 x 400 x 150 mm. -
Case for testo 400/440 and sensors
890:- exkl. moms Art.nr 0516 4401Service bag for testo 440/400 and sensors. Dimensions: 516 x 135 x 256 mm. -
Stos set
2 750:- exkl. moms Art.nr 0563 4170Nozzle set with two nozzles (incl. bag) for volume flow measurement over donors.
- Socket with round opening ø200 mm
- Socket with square opening 330 x 330 mm
- For testo 400 / 417 / 435 / 480 / 440 / 440 dP
They also work well with the testo 400 or testo 440 / testo 440 dP multi-instruments, for example in combination with one of these sensors:
- Vane sensor with Bluetooth
- Vane sensor with fixed cable
- These probes are suitable for exhaust air measurements and also for supply air measurements in ventilation systems where they do not cause excessive pressure drop.
-
USB power supply unit
585:- exkl. moms Art.nr 0554 1105- USB power supply 5 V, 1 A
- USB cable with mini-B connector
- Equipped with ferrite core to reduce interference
- Cable length: 2 m
- Suitable for e.g. testo 320 and some thermal imaging cameras
-
Mobile Bluetooth/IRDA printer
3 795:- exkl. moms Art.nr 0554 0622Print graphics and measurement data from compatible Testo instruments or Testo apps with this mobile Bluetooth IRDA printer. 1 roll of printer paper, rechargeable battery and power supply included.- Bluetooth® & IRDA interface in one printer
- Printing of graphics and measurement data
- Colored LEDs to indicate the status of the printer
- Data transfer in 2 seconds
-
Printer paper
355:- exkl. moms Art.nr 0554 0568Extra printer paper for Testo's printers (6 rolls). Documentation of measurement data that is readable for up to 10 years. -
Measuring stand
5 780:- exkl. moms Art.nr 0554 1591Measuring stand for testo 400/440 for comfort level/indoor climate measurements with sensor placement according to standard (incl. bag with space for global sensors 0602 0743). -
Connection hose 25 meters
995:- exkl. moms Art.nr 0140 0025Silicone hose for connection to pressure gauge, 25 meters.- 25 m
- Max load 700 hPa/mbar
- Tmax 180°C
- Inner diameter 4 mm, outer diameter 7 mm
-
Connection hose 5 meters
260:- exkl. moms Art.nr 0554 0440Silicone hose for connection to pressure gauge, 5 meters.- 5 m
- Max load 700 hPa/mbar
- Tmax 180°C
- Inner diameter 4 mm, outer diameter 7 mm
-
Plastic plug 8 mm
210:- exkl. moms Art.nr 2340 0008Plastic plug Ø 8 mm for sealing measuring holes. One jar contains 100 plugs. -
Plastic plug 10 mm
210:- exkl. moms Art.nr 2340 0010Plastic plug Ø 10 mm for sealing measuring holes. One jar contains 100 plugs. -
Plastic plug 12 mm
210:- exkl. moms Art.nr 2340 0012Plastic plug Ø 12 mm for sealing measuring holes. One jar contains 90 plugs.
Datablad testo 440
Similar products
testo 400 – measurement kit for ventilation
Measurement set with the testo 400 climate instrument for ventilation professionals.
- Ventilation course included! Valid for purchase by February 10
- Measurement of air velocity and air flow on diffusers and in ducts
- Display airflow in l/s or m3/h
- Hot wire sensor (Ø 7.5 mm) with telescope and fixed cable included
