7090 6015
-
Water resistant enclosure – 162 x 97 x 45 mm
595:- Art.nr 7040 1040Water resistant enclosure for your Celsicom Easy Connect box with external sensors. Robust, shatterproof, water and dust resistant enclosure that protects your boxes in most weather conditions. Place the box in the enclosure and clip the external cable sensor to the edge strip.- Dimensions: 162 x 97 x 45 mm
-
AA alkaline battery
10:- Art.nr 0515 0026Alkaline AA battery, 1.5 volts, type LR6. The price is for 1 battery. -
Magnetic mounts
79:- Art.nr 7040 0060Magnetic mount that facilitates the installation of Celsicom Easy Connect sensors and avoids interference. Used to attach the sensor to metal surfaces (not certain types of stainless steel). The mount consists of a 10 mm thick plastic part with a double-sided adhesive tape on one side and a magnetic tape on the other. As the sensor comes out 10 mm from the metal wall, the metal in the wall does not affect the radio transmitter/antenna of the sensor. If the distance is shorter, the sensor's reception ratio will be very negatively affected.- Clean the back of the sensor from dirt and grease. Make sure the surface is dry.
- Remove the protective plastic from the double-sided tape and install the bracket on the lower part of the back of the sensor (see picture). Press the bracket against the sensor for about 10 seconds.
- Now attach the sensor to any metal surface. However, mounting against some stainless steel variants will not work.
-
Service bag for measuring boxes
895:- Art.nr 7016 6012Practical and durable bag with room for four gray Celsicom Easy Connect boxes as well as sensors, mounts and other accessories. External dimensions (width x height x depth): 390 x 310 x 140 mm). -
Magnetic mounts for cables
200:- Art.nr 7040 0003Rotatable magnetic mounts for cables to Celsicom sensors. Ideal for quick cabling. Five brackets in each pack.
