Celsicom TH601B – 2 m cable temperature/humidity sensor
Logger with fixed cable sensor for temperature and humidity measurement (2 meters)
- Measuring range: -30°C ... +70°C, 0 ... 100 %RH
- Also suitable for applications with high moisture values
- Adjusted for building moisture applications
- Low price on unlimited cloud storage
4 180
Finns i lager
Finns i lager
TH601B – Directly connected humidity and temperature monitor
The Celsicom TH601B data logger has a compact, moisture-resistant housing and a fixed external cable sensor for temperature and humidity measurement (2 meter cable length). Measurements are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature, %RH, vapor content and dew point during moisture remediation, building moisture and more. Suitable for applications above 80 %RH, e.g. when dehumidifying concrete slabs.
The main benefits
No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.
Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.
Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.
Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.
Temperature and humidity curve
The curves below are an example of what it can look like in the mobile phone, tablet or computer when monitoring temperature and humidity in the same measuring point.
[show_related_featured_videos]
Included in delivery
Celsicom Easy Connect TH601B, temp/humidity sensor 2 m cable
ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).
| Measurement range | -30 ... +70 °C 0 ... 100 %RH |
| Accuracy | ±0.5°C ±3%RH (at 20-80%RH) |
| Operating temperature | -30 ... +70 °C |
| Connection | NB-IoT (LTE Cat NB1) B20 Output power 23 dBm |
| Batteries | 2 x AA/LR6 1.5V (not included) |
| Battery life | Depending on transmission interval. Example at 20°C, good signal quality, measurement every 5 minutes and transmission every 3 hours: > 12 months |
| Measurement and transmission intervals | Adjustable by users via the Celsiview cloud service. |
| Memory | 200 measurements |
| Size | Enclosure 78 (w) x 114 (h) x 30 (d) mm |
| Weight | 114 grams (T/TH600, without battery) |
| Certificate | CE |
| Mounting method | Mounted vertically with the screw holes facing up |
| Cable length | 2 meters |
| Protection class | IP 53 |
Spare part sensor
-

Spare part sensor 2 m for Celsicom TH601B
1 150 Art.nr 7060 6200Spare part sensor (2 meters) with loose cable ends for temperature and humidity for Celsicom TH601B, including building humidity adjustment. ATTENTION! Unique ID number provided on separate label needed for pairing the sensor with the Celsicom box in the Celsiview cloud service.
-

Rubber stoppers RBK
295 Art.nr 3460 0013Pack of 12 rubber stoppers for sealing measuring tubes. Approved by RBK. -

Rubber stoppers
85 Art.nr 3460 0015Pack of 10 rubber stoppers for sealing measuring tubes. Not approved by RBK. -

Teflon filter
250 Art.nr 7060 6208Teflon filter threaded on the humidity sensor. Protects the sensor from dust, dirt and free water. Outer Ø=11 mm, Inner Ø=8 mm, l= 20 mm -

Measuring tube 120 mm
185 Art.nr 3560 0120Lining tubes for boreholes for moisture measurement. Package of 12 pieces of 120 mm long tubes. Suitable for the testo 605-H1 moisture meter. -

Measuring tube 200 mm
395 Art.nr 3560 0200Liners for insertion into boreholes for moisture measurement. Package of 12 pieces of 200 mm long tubes. Suitable for the testo 605-H1 moisture meter. -

Protective shoe
395 Art.nr 3560 0180Protects the moisture meter during borehole measurement. The protective cone is screwed over the drill hole. Screw and plug included. -

Sealing compound
130 Art.nr 2460 0004Paste for sealing boreholes in connection with moisture measurement.- Bostik PV, approved by RBK
- Each package contains one meter of sealant
-

Filter tape
60 Art.nr 2160 1002Filter tape for moisture meters. Protects the moisture sensor from dust during borehole measurement. -

Density testers
350 Art.nr 3560 0001Rubber bladder for tightness control of boreholes in connection with moisture measurement. -

Moisture jar 11 %RH
1 075 Art.nr 0160 2111Jar of saline solution maintaining a relative humidity of 11%. For checking and calibrating moisture meters. Incl. clamping screws. -

Moisture jar 33 %RH
1 075 Art.nr 0160 2133Jar of saline solution maintaining a relative humidity of 33%. For checking and calibrating moisture meters. Incl. clamping screws. -

Moisture jar 43 %RH
1 075 Art.nr 0160 2143Jar of saline solution maintaining a relative humidity of 43%. For checking and calibrating moisture meters. Incl. clamping screws. -

Moisture jar 54 %RH
1 075 Art.nr 0160 2154Jar of saline solution maintaining a relative humidity of 54%. For checking and calibrating moisture meters. Incl. clamping screws. -

Moisture jar 60 %RH
1 075 Art.nr 0160 2160Jar of saline solution maintaining a relative humidity of 60%. For checking and calibrating moisture meters. Incl. clamping screws. -

Moisture jar 75.3 %RH
1 075 Art.nr 0160 2175Jar of saline solution maintaining a relative humidity of 75.3%. For checking and calibrating moisture meters. Incl. clamping screws. -

Humidity jar 85% RH
1 075 Art.nr 0160 2185Jar of saline solution maintaining a relative humidity of 85%. For checking and calibrating moisture meters. Incl. clamping screws. -

Moisture jar 95 %RH
1 075 Art.nr 0160 2195Jar of saline solution maintaining a relative humidity of 95%. For checking and calibrating moisture meters. Incl. clamping screws. -

HumiCal 85
5 750 Art.nr 0160 9085Moisture jar for calibrating and checking up to 6 moisture meters at a time with a salt solution that maintains a relative humidity of 85%. -

Water resistant enclosure – 162 x 97 x 45 mm
595 Art.nr 7040 1040Water resistant enclosure for your Celsicom Easy Connect box with external sensors. Robust, shatterproof, water and dust resistant enclosure that protects your boxes in most weather conditions. Place the box in the enclosure and clip the external cable sensor to the edge strip.- Dimensions: 162 x 97 x 45 mm
-

AA alkaline battery
10 Art.nr 0515 0026Alkaline AA battery, 1.5 volts, type LR6. The price is for 1 battery. -

Magnetic mounts
79 Art.nr 7040 0060Magnetic mount that facilitates the installation of Celsicom Easy Connect sensors and avoids interference. Used to attach the sensor to metal surfaces (not certain types of stainless steel). The mount consists of a 10 mm thick plastic part with a double-sided adhesive tape on one side and a magnetic tape on the other. As the sensor comes out 10 mm from the metal wall, the metal in the wall does not affect the radio transmitter/antenna of the sensor. If the distance is shorter, the sensor's reception ratio will be very negatively affected.- Clean the back of the sensor from dirt and grease. Make sure the surface is dry.
- Remove the protective plastic from the double-sided tape and install the bracket on the lower part of the back of the sensor (see picture). Press the bracket against the sensor for about 10 seconds.
- Now attach the sensor to any metal surface. However, mounting against some stainless steel variants will not work.
-

Service bag for measuring boxes
895 Art.nr 7016 6012Practical and durable bag with room for four gray Celsicom Easy Connect boxes as well as sensors, mounts and other accessories. External dimensions (width x height x depth): 390 x 310 x 140 mm). -

Magnetic mounts for cables
200 Art.nr 7040 0003Rotatable magnetic mounts for cables to Celsicom sensors. Ideal for quick cabling. Five brackets in each pack.
Similar products
Celsicom TH601A – 0.4 m cable temperature/humidity sensor
Directly connected temperature and humidity monitoring, ideal for logging moisture in concrete, among other things.
- Fixed cable sensor for temperature and humidity measurement (0.4 meters)
- Also suitable for applications with high moisture values
- Measuring range: -30°C ... +70°C, 0 ... 100 %RH
- Low price on unlimited cloud storage







