Celsicom TH611B – 2 m cable probe for temperature/humidity
Logger with fixed cable probe for temperature and humidity measurement (2 meters)
- Measuring range: -30°C ... +70°C, 0 ... 100% RH
- Also adapted for applications with high humidity values
- Adjusted for construction moisture applications
- Low price for unlimited cloud storage
4 180
In stock
In stock
TH611B – Direct-connected humidity and temperature monitoring
The Celsicom TH611B data logger has a compact, moisture-resistant housing and a fixed external cable probe for temperature and humidity measurement (2-meter cable length). Measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow measurements in real time, receive alarms if anything deviates, and create reports – no matter where you are. Typical applications for this logger in the Celsicom system include remote monitoring of temperature, %RH, vapor content, and dew point during moisture remediation, construction moisture, and more. Suitable for applications above 80% RH, e.g., when dehumidifying concrete slabs.
The main benefits
No gateway or base station needed
All loggers in the new Celsicom generation have a direct, secure transmission of data to the cloud without going through a base station or gateway. Data traffic is sent on a licensed frequency solely intended for NB-IoT in Telia's existing mobile network. The coverage is superb and the risk of interference is virtually zero.
Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you'll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.
Celsiview cloud service
All measured values are automatically stored in the Celsiview cloud service. The price for cloud storage is 25 SEK per month per logger. This also includes the cost of all data traffic. An unlimited amount of data is stored in the cloud as long as the subscription continues.
Backup memory
In addition to all measured values being sent to the cloud service, they are also saved in a backup memory in each logger. Should an interference occur despite everything, all measurement data is sent at the next transmission opportunity.
Temperature and humidity curve
The curves below are an example of how it can look on a mobile, tablet, or computer when monitoring temperature and humidity at the same measurement point.
Included in delivery
Celsicom Easy Connect TH611B, temp/humidity probe 2 m cable
NOTE!
- Don't forget to buy batteries. Two are needed for each logger (see under the Accessories tab).
- If the box is to be mounted against metal, bracket 7040 0060 must be used (see under the Accessories tab).
| Mätområde | -30 ... +70 °C 0 ... 100 %RH |
| Noggrannhet | ±0,5°C ±3 %RH (vid 20-80 %RH) |
| Drifttemperatur | -30 ... +70 °C |
| Uppkoppling | NB-IoT (LTE Cat NB1) B20 Uteffekt 23 dBm |
| Batterier | 2 x AA/LR6 1,5V (ingår ej) |
| Batteritid | Beroende av sändningsintervall. Exempel vid 20°C, god signalkvalitet, mätning var 5:e minut och sändning var 3:e timma: > 12 månader |
| Mät- och sändningsintervall | Justerbart av användare via molntjänsten Celsiview. |
| Minne | 200 mätningar |
| Storlek | Kapsling 78 (b) x 114 (h) x 30 (d) mm |
| Vikt | 114 gram (T/TH600, utan batteri) |
| Certifikat | CE |
| Monteringssätt | Monteras vertikalt med skruvhålen uppåt |
| Kabellängd | 2 meter |
| Skyddsklass | IP 53 |
Spare part sensor
-

Spare probe 2 m for Celsicom TH611B
1 150 Art.nr 7260 6200Spare probe (2 m) with loose cable ends for temperature and humidity for Celsicom TH611B, including construction moisture adjustment. NOTE! A unique ID number is included on a separate label, required to pair the probe with the Celsicom box in the Celsiview cloud service.
-

Rubber stoppers RBK
310 Art.nr 3460 0013Pack of 12 rubber stoppers for sealing measuring tubes. Approved by RBK.
-

Rubber stoppers
95 Art.nr 3460 0015Pack of 10 rubber stoppers for sealing measuring tubes. Not approved by RBK.
-

Teflon filter
250 Art.nr 7060 6208Teflon filter threaded on the humidity sensor. Protects the sensor from dust, dirt and free water. Outer Ø=11 mm, Inner Ø=8 mm, l= 20 mm
-

Measuring tube 120 mm
185 Art.nr 3560 0120Lining tubes for boreholes for moisture measurement. Package of 12 pieces of 120 mm long tubes. Suitable for the testo 605-H1 moisture meter.
-

Measuring tube 200 mm
395 Art.nr 3560 0200Liners for insertion into boreholes for moisture measurement. Package of 12 pieces of 200 mm long tubes. Suitable for the testo 605-H1 moisture meter.
-

Protective shoe
425 Art.nr 3560 0180Protects the moisture meter during borehole measurement. The protective cone is screwed over the drill hole. Screw and plug included.
-

Sealing compound
130 Art.nr 2460 0004Paste for sealing boreholes in connection with moisture measurement.
- Bostik PV, approved by RBK
- Each package contains one meter of sealant
-

Filter tape
60 Art.nr 2160 1002Filter tape for moisture meters. Protects the moisture sensor from dust during borehole measurement.
-

Density testers
350 Art.nr 3560 0001Rubber bladder for tightness control of boreholes in connection with moisture measurement.
-

Moisture jar 11 %RH
1 075 Art.nr 0160 2111Jar of saline solution maintaining a relative humidity of 11%. For checking and calibrating moisture meters. Incl. clamping screws.
-

Moisture jar 33 %RH
1 075 Art.nr 0160 2133Jar of saline solution maintaining a relative humidity of 33%. For checking and calibrating moisture meters. Incl. clamping screws.
-

Moisture jar 43 %RH
1 075 Art.nr 0160 2143Jar of saline solution maintaining a relative humidity of 43%. For checking and calibrating moisture meters. Incl. clamping screws.
-

Moisture jar 54 %RH
1 075 Art.nr 0160 2154Jar of saline solution maintaining a relative humidity of 54%. For checking and calibrating moisture meters. Incl. clamping screws.
-

Moisture jar 60 %RH
1 075 Art.nr 0160 2160Jar of saline solution maintaining a relative humidity of 60%. For checking and calibrating moisture meters. Incl. clamping screws.
-

Moisture jar 75.3 %RH
1 075 Art.nr 0160 2175Jar of saline solution maintaining a relative humidity of 75.3%. For checking and calibrating moisture meters. Incl. clamping screws.
-

Humidity jar 85% RH
1 075 Art.nr 0160 2185Jar of saline solution maintaining a relative humidity of 85%. For checking and calibrating moisture meters. Incl. clamping screws.
-

Moisture jar 95 %RH
1 075 Art.nr 0160 2195Jar of saline solution maintaining a relative humidity of 95%. For checking and calibrating moisture meters. Incl. clamping screws.
-

HumiCal 85
5 750 Art.nr 0160 9085Moisture jar for calibrating and checking up to 6 moisture meters at a time with a salt solution that maintains a relative humidity of 85%.
-

Water resistant enclosure – 162 x 97 x 45 mm
595 Art.nr 7040 1040Water resistant enclosure for your Celsicom Easy Connect box with external sensors. Robust, shatterproof, water and dust resistant enclosure that protects your boxes in most weather conditions. Place the box in the enclosure and clip the external cable sensor to the edge strip.
- Dimensions: 162 x 97 x 45 mm
-

AA alkaline battery
10 Art.nr 0515 0026Alkaline AA battery, 1.5 volts, type LR6. The price is for 1 battery.
-

Magnetic mounts
79 Art.nr 7040 0060Magnetic mount that facilitates the installation of Celsicom Easy Connect sensors and avoids interference. Used to attach the sensor to metal surfaces (not certain types of stainless steel). The mount consists of a 10 mm thick plastic part with a double-sided adhesive tape on one side and a magnetic tape on the other. As the sensor comes out 10 mm from the metal wall, the metal in the wall does not affect the radio transmitter/antenna of the sensor. If the distance is shorter, the sensor's reception ratio will be very negatively affected.
- Clean the back of the sensor from dirt and grease. Make sure the surface is dry.
- Remove the protective plastic from the double-sided tape and install the bracket on the lower part of the back of the sensor (see picture). Press the bracket against the sensor for about 10 seconds.
- Now attach the sensor to any metal surface. However, mounting against some stainless steel variants will not work.
-

Service bag for measuring boxes
895 Art.nr 7016 6012Practical and durable bag with room for four gray Celsicom Easy Connect boxes as well as sensors, mounts and other accessories. External dimensions (width x height x depth): 390 x 310 x 140 mm).
-

Magnetic mounts for cables
200 Art.nr 7040 0003Rotatable magnetic mounts for cables to Celsicom sensors. Ideal for quick cabling. Five brackets in each pack.
Similar products
Celsicom TH601A – 0.4 m cable temperature/humidity sensor
Directly connected temperature and humidity monitoring, ideal for logging moisture in concrete, among other things.
- Fixed cable sensor for temperature and humidity measurement (0.4 meters)
- Also suitable for applications with high moisture values
- Measuring range: -30°C ... +70°C, 0 ... 100 %RH
- Low price on unlimited cloud storage







