Celsicom MM611 – moisture sensor with 1.2 m cable
Directly connected remote monitoring of humidity level
- Monitor moisture levels remotely on your phone, computer or tablet.
- Adjustable measurement curve for pine, spruce or WME
- Low price on unlimited cloud storage
1 995:- exkl. moms
Finns i lager
Finns i lager
Celsicom MM611 – Directly connected humidity logging.
The MM611 is used to measure moisture in structures via nails/screws installed in the material. In the Celsiview cloud service, you set the desired measurement curve, such as for pine, spruce or WME.
No gateway or base station needed
All boxes in the new Celsicom generation have a direct, secure transfer of data to the cloud without the need for a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.
Easy to get started
Once you have scanned the QR code on your first box, a window will open on your phone where you can create a new cloud service account. After filling in your data and naming the box, you can quickly get started and instantly see the values from the box on your phone, tablet or computer. If you already have an account, log in and name the new box.
Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview. Ordinarie pris för molnlagringen är 22:– i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.
Backup memory
In addition to sending all measurement values to the cloud service, they are also saved in a backup memory in each box. However, if there is a disruption, all measurement data is sent at the next transmission time.
Included in the delivery
A moisture sensor MM611
Mätområde resistans: | 5 kOhm till 600 MOhm |
Noggrannhet resistans: | ±15 % vid 50 kOhm till 300 MOhm |
Mätområde fur (Trätek): | 11,9 % ... 97,8 % |
Noggrannhet fur (Trätek): | ±1 %FK vid 12,9 till 30 % |
Mätområde gran (Trätek): | 12,4 % ... 97,8 % |
Noggrannhet gran (Trätek): | ±1 %FK vid 13,4 till 30 % |
Mätområde WME: | 10,4 % ... 97,8 % |
Noggrannhet WME: | ±1 %FK vid 11,7 till 50,3 % |
Rekommenderade batterier: | 2 x AA 1,5V alkaliska |
Mått MM611B (mm) och vikt: | 78 (b) x 114 (h) x 30 (d) och 114 gr |
IP-klass: | 53 |
Kabellängd: | 1,2 meter |
Mätintervall: | 1 tim (standard) eller 3 tim |
Sändningsintervall: | 1 tim, 3 tim (standard), 6 tim eller 12 tim |
Driftstid på batterier med standardinställning för sändningsintervall och vid normal signalkvalitet: | ≈ 12-18 månader * |
Lagringstid av mätdata (molntjänst): | 36 månader |
*Många faktorer spelar roll angående driftstid på batteri. Kvalitet på batteri, signalkvalitet och omgivande temperatur är några viktiga parametrar. Om givaren tvingas larma ovanligt ofta för överskridna gränsvärden så minskar driftstiden också. |
-
AA alkaline battery
10:- exkl. moms Art.nr 0515 0026Alkaline AA battery, 1.5 volts, type LR6. The price is for 1 battery. -
Magnetic mounts
59:- exkl. moms Art.nr 7040 0060Magnetic mount that facilitates the installation of Celsicom Easy Connect sensors and avoids interference. Used to attach the sensor to metal surfaces (not certain types of stainless steel). The mount consists of a 10 mm thick plastic part with a double-sided adhesive tape on one side and a magnetic tape on the other. As the sensor comes out 10 mm from the metal wall, the metal in the wall does not affect the radio transmitter/antenna of the sensor. If the distance is shorter, the sensor's reception ratio will be very negatively affected.- Clean the back of the sensor from dirt and grease. Make sure the surface is dry.
- Remove the protective plastic from the double-sided tape and install the bracket on the lower part of the back of the sensor (see picture). Press the bracket against the sensor for about 10 seconds.
- Now attach the sensor to any metal surface. However, mounting against some stainless steel variants will not work.
-
Service bag for measuring boxes
895:- exkl. moms Art.nr 7016 6012Practical and durable bag with room for four gray Celsicom Easy Connect boxes as well as sensors, mounts and other accessories. External dimensions (width x height x depth): 390 x 310 x 140 mm).
Similar products
Protimeter SurveyMaster – moisture meter
Precise material moisture measurement in wood with characteristic curves
- Moisture indication in building materials
- Accessory hammer sensors
- LED lights for visual moisture detection