7060 6011
-
Rubber stoppers RBK
295:- Art.nr 3460 0013Pack of 12 rubber stoppers for sealing measuring tubes. Approved by RBK. -
Rubber stoppers
75:- Art.nr 3460 0015Pack of 10 rubber stoppers for sealing measuring tubes. Not approved by RBK. -
Teflon filter
250:- Art.nr 7060 6208Teflon filter threaded on the humidity sensor. Protects the sensor from dust, dirt and free water. Outer Ø=11 mm, Inner Ø=8 mm, l= 20 mm -
Measuring tube 120 mm
185:- Art.nr 3560 0120Lining tubes for boreholes for moisture measurement. Package of 12 pieces of 120 mm long tubes. Suitable for the testo 605-H1 moisture meter. -
Measuring tube 200 mm
370:- Art.nr 3560 0200Liners for insertion into boreholes for moisture measurement. Package of 12 pieces of 200 mm long tubes. Suitable for the testo 605-H1 moisture meter. -
Protective shoe
350:- Art.nr 3560 0180Protects the moisture meter during borehole measurement. The protective cone is screwed over the drill hole. Screw and plug included. -
Sealing compound
130:- Art.nr 2460 0004Paste for sealing boreholes in connection with moisture measurement.- Bostik PV, approved by RBK
- Each package contains one meter of sealant
-
Filter tape
60:- Art.nr 2160 1002Filter tape for moisture meters. Protects the moisture sensor from dust during borehole measurement. -
Density testers
280:- Art.nr 3560 0001Rubber bladder for tightness control of boreholes in connection with moisture measurement. -
Moisture jar 11 %RH
1 075:- Art.nr 0160 2111Jar of saline solution maintaining a relative humidity of 11%. For checking and calibrating moisture meters. Incl. clamping screws. -
Moisture jar 33 %RH
1 075:- Art.nr 0160 2133Jar of saline solution maintaining a relative humidity of 33%. For checking and calibrating moisture meters. Incl. clamping screws. -
Moisture jar 43 %RH
1 075:- Art.nr 0160 2143Jar of saline solution maintaining a relative humidity of 43%. For checking and calibrating moisture meters. Incl. clamping screws. -
Moisture jar 54 %RH
1 075:- Art.nr 0160 2154Jar of saline solution maintaining a relative humidity of 54%. For checking and calibrating moisture meters. Incl. clamping screws. -
Moisture jar 60 %RH
1 075:- Art.nr 0160 2160Jar of saline solution maintaining a relative humidity of 60%. For checking and calibrating moisture meters. Incl. clamping screws. -
Moisture jar 75.3 %RH
1 075:- Art.nr 0160 2175Jar of saline solution maintaining a relative humidity of 75.3%. For checking and calibrating moisture meters. Incl. clamping screws. -
Humidity jar 85% RH
1 075:- Art.nr 0160 2185Jar of saline solution maintaining a relative humidity of 85%. For checking and calibrating moisture meters. Incl. clamping screws. -
Moisture jar 95 %RH
1 075:- Art.nr 0160 2195Jar of saline solution maintaining a relative humidity of 95%. For checking and calibrating moisture meters. Incl. clamping screws. -
HumiCal 85
5 590:- Art.nr 0160 9085Moisture jar for calibrating and checking up to 6 moisture meters at a time with a salt solution that maintains a relative humidity of 85%. -
Water resistant enclosure – 162 x 97 x 45 mm
450:- Art.nr 7040 1040Water resistant enclosure for your Celsicom Easy Connect box with external sensors. Robust, shatterproof, water and dust resistant enclosure that protects your boxes in most weather conditions. Place the box in the enclosure and clip the external cable sensor to the edge strip.- Dimensions: 162 x 97 x 45 mm
-
AA alkaline battery
10:- Art.nr 0515 0026Alkaline AA battery, 1.5 volts, type LR6. The price is for 1 battery. -
Magnetic mounts
59:- Art.nr 7040 0060Magnetic mount that facilitates the installation of Celsicom Easy Connect sensors and avoids interference. Used to attach the sensor to metal surfaces (not certain types of stainless steel). The mount consists of a 10 mm thick plastic part with a double-sided adhesive tape on one side and a magnetic tape on the other. As the sensor comes out 10 mm from the metal wall, the metal in the wall does not affect the radio transmitter/antenna of the sensor. If the distance is shorter, the sensor's reception ratio will be very negatively affected.- Clean the back of the sensor from dirt and grease. Make sure the surface is dry.
- Remove the protective plastic from the double-sided tape and install the bracket on the lower part of the back of the sensor (see picture). Press the bracket against the sensor for about 10 seconds.
- Now attach the sensor to any metal surface. However, mounting against some stainless steel variants will not work.
-
Service bag for measuring boxes
895:- Art.nr 7016 6012Practical and durable bag with room for four gray Celsicom Easy Connect boxes as well as sensors, mounts and other accessories. External dimensions (width x height x depth): 390 x 310 x 140 mm). -
Magnetic mounts for cables
200:- Art.nr 7040 0003Rotatable magnetic mounts for cables to Celsicom sensors. Ideal for quick cabling. Five brackets in each pack. -
Magnetic fasteners for cable ties
200:- Art.nr 7040 0006Celsicom swivel magnetic fasteners for cable ties- Facilitates installation
- With a cable tie you can easily attach sensors and cables etc.
- 1 frp = 5 brackets
