testo 300 Pro I – O2 and CO up to 8 000 ppm
Measurement of O2 and CO (up to 8,000 ppm), optional NO
- CAMPAIGN! Until December 31, 2024, the first service is included free of charge with the purchase of a flue instrument! The offer can be used within 18 months of purchase.
- Suitable for medium-sized boilers
- Large touchscreen - as easy to use as your smartphone
- H2 compensated CO measuring cell
- Sending reports by email
testo 300 Pro I – O2 and CO measurement up to 8,000 ppm
Truly smart flue gas measurement, that’s what the testo 300 stands for. The compact flue gas meter is fully controlled via the large touch screen. You can see all measurements immediately without scrolling. The highly scratch-resistant display is enclosed in a robust plastic instrument housing, which can be relied on even in tough daily working conditions.
There are ready-made menus for the most important measurements to guide you through your work. Moreover, the flue gas meter does not know what waiting times or starting phases are. It is immediately ready to measure even if it is in standby mode. It handles documentation just as quickly – with the testo 300, reports can be created and sent directly from the measurement site.
Advantages of the testo 300 Pro 1
- Large scratch-resistant 5″ HD touchscreen with SmartTouch function and replaceable protective film
- H2 compensated CO measuring cell
- Optional NO measuring cell
- Ready-made intuitive menus for all relevant measurements
- 4 strong magnets with rubber coating for material-friendly mounting
- Ready to measure directly even in standby mode
- Send reports by email directly from the measurement site
Existing sensors
Sensors suitable for the testo 320, testo 330 and testo 330-1/-2 LL can also be connected to the testo 300 thanks to the practical multi-pole connector.
New donors
New sensors with twist-protected USB C connection are available for temperature measurement, such as supply and return temperatures, and for measuring ambient CO.
Display with SmartTouch
The touchscreen with SmartTouch technology responds immediately without delay. Intuitive operation – as easy as with your smartphone
Reports by e-mail
testo 300 allows you to document the measurement results directly on site. There is also a dictation function that saves you from having to type the data. You can send reports to the office or customers directly via WiFi.
Full control of all measured values
You can see all system parameters directly on the large 5-inch HD touchscreen.
Get faster results
Clearly structured menus for all relevant measurements are available in the meter and guide you efficiently.
Ready to use immediately
No more waiting time. In standby mode, the testo 300 is immediately ready for measurement at the touch of a button.
Included in delivery
Smoke gas meter testo 300 Pro I withO2 andH2 compensated CO measuring cell up to 8,000 ppm, USB power supply.
Measurement parameter | Measurement area | Accuracy (±1 digit) | Resolution |
O2 measurement | 0 … 21 vol. % | ±0.2 vol. % | 0,1 vol. % |
CO measurement (with H2 compensation) | 0 ... 8 000 ppm | ±10 ppm or ±10% of mv (0 ... 200 ppm) ±20 ppm or ±5% of mv (201 ... 2,000 ppm ±10% of m.v. (2,001 ... 8,000 ppm) | 1 ppm |
NO measurement (optional) | 0 … 3 000 ppm | ±5 ppm (0 … 100 ppm) ±5% of m.v. (101 ... 2,000 ppm) ±10% of m.v. (2,001 … 3,000 ppm) | 1 ppm |
Efficiency test (Eta) | 0 ... 120% | 0,1 % | |
Smoke gas loss | 0 ... 99,9 % | 0,1 % | |
CO2 determination (digital calculation from O2) | Max display 0 … CO2 max. | ±0,2 vol. % | 0,1 vol. % |
Drag measurement | -9,99 … +40 hPa | ± 0.005 hPa (0 … 0.1 hPa) ± 0.02 hPa (0.1 … +3.00 hPa) ±1.5% of m.v. (+3.01 … +40 hPa) | 0.001 hPa (0 … 0.1 hPa) 0.01 hPa (rem. measuring range) |
4 Pa measurement (for instruments with dilution) | -50 … +50 Pa | ±0.3 Pa (< 10 Pa) ±3% of m.v. (rem. measuring range) | 0.1 Pa |
Pressure measurement | -100 … +200 hPa | ± 0.5 hPa (0 … +50.0 hPa) ±1% of m.v. (+50.1 … +100.0 hPa) ±1.5% of m.v. (+100.1 … +200 hPa) | 0.01 hPa |
Temperature (instrument) | -40 … +1 200 °C | ±0.5 °C (0.0 … +100.0 °C) ±0.5% of m.v. (rem. measuring range) | 0.1 °C (-40 … +999.9 °C) 1 °C (rem. measuring range) |
Measurement of ambient CO (internal / flue gas sensor) | 0 … 2 000 ppm | ± 10 ppm (0 … 100 ppm) ±10% of m.v. (101 ... 2,000 ppm) | 1 ppm |
Measurement of ambient CO (external with CO sensor) | 0 … 500 ppm | ± 3 ppm (0 … 29 ppm) ±10% of m.v. (30 … 500 ppm) | 1 ppm |
GENERAL TECHNICAL DATA | |||
Certification | testo 300 is TÜV-tested according to BImSchV (German regulation: Bundes-Immissionsschutzverordnung) EN 50379, Parts 1-3 | ||
Storage temperature | -20 ... +50 °C | ||
Operating temperature | -5 ... +45 °C | ||
Charging temperature | 0 … +45 °C | ||
Moisture measuring range | 15 ... 90 %RH, non-condensing | ||
Power supply | Accumulator, USB power supply | ||
Accumulator operating time | 10 hours | ||
Protection class | IP 40 | ||
Display | 5-inch touchscreen, HD 1280x720 pixels, IPS (160 k) | ||
Weight | About 800 g | ||
Dimensions | L: 244 mm (incl. sensor input) H: 59 mm W: 98 mm | ||
testo 300 Longlife Guarantee | O2 LL and CO LL measuring cell: 48 months NO measuring cell: 24 months |
Flue gas probes
-
testo 510i – wireless differential pressure sensor
1 555:- exkl. moms Art.nr 0560 1510Measurement of gas flow, static pressure and air flow.
- -150 ... +150 hPa
- Measurement menu for pressure drop test incl.. alarm
- Magnetic mount for more secure attachment
-
Modular flue gas sensor, length 180 mm, diam. 8 mm
3 565:- exkl. moms Art.nr 0600 9760Modular flue gas sensor, 180 mm insertion depth with cone, thermocouple (type K). Tmax 500°C, integrated particle filter, 2.2 meter viton hose for high gas velocity. -
Standard sensors diam. 6 mm
2 360:- exkl. moms Art.nr 0600 9741Compact flue gas sensor, 300 mm insertion depth, diam. 6 mm incl. styrkona, thermocouple (NiCr-Ni) up to +500 °C, 1.5 m hose. -
Modular flue gas sensor, length 300 mm, diam. 8 mm
3 950:- exkl. moms Art.nr 0600 9761Modular flue gas sensor, 300 mm insertion depth with cone, thermocouple (type K) Tmax +500°C, integrated particle filter, 2.2 meter viton hose for high gas velocity.
-
USB adapter with cable
560:- exkl. moms Art.nr 0554 1106Use the power supply with micro-USB to power your measuring instrument (e.g. testo 400, testo 300). Thanks to the different plug types supplied, the adapter is also suitable for international use.- For external power supply
- 230 V AC / 5 V DC (2 A)
- Micro-USB cable
-
Soot pump
1 650:- exkl. moms Art.nr 0554 0307Soot pump with filter paper for soot samples. -
Particle filter
385:- exkl. moms Art.nr 0554 338510-pack of filters for flue gas sensors. -
System bag
1 070:- exkl. moms Art.nr 0516 3300Case to fit the testo 300, 320, 327 and 330 flue gas meters. With space for instruments, sensors and other accessories. -
Differential temperature rate
1 550:- exkl. moms Art.nr 0554 1208Differential temperature rate (or Delta T rate) for flue gas analysis. -
Hose connection kit
685:- exkl. moms Art.nr 0554 1203Hose connection kit for separate gas pressure measurement. -
O2 measuring cell for testo 300
2 594:- exkl. moms Art.nr 0393 0023Spare measuring cell for O2 for testo 300. -
NO measuring cell
5 160:- exkl. moms Art.nr 0393 0151NO measuring cell 0 ... 3 000 pm. For flue gas meters from Testo. -
H2 compensated CO measuring cell
7 779:- exkl. moms Art.nr 0393 0111CO measuring cell for testo, H2 compensated, 0-8000 ppm. Suitable for testo 330. -
Printers
3 710:- exkl. moms Art.nr 0554 0621Bluetooth/IRDA printer incl. 1 roll of printer paper, accumulator and power supply. -
Printer paper
345:- exkl. moms Art.nr 0554 0568Extra printer paper for Testo's printers (6 rolls). Documentation of measurement data that is readable for up to 10 years.
Uppdaterings-/utvärderingsversion av analysprogrammet testo EasyHeat.
Installationstips
I de flesta Windows-versioner laddas filer ned till en mapp med namnet ”Hämtade filer” eller ”Download”. Flytta den nedladdade ZIP-filen till C:/temp eller direkt till C:/ och packa upp den. Högerklicka sedan på EXE-filen och välj ”Kör som administratör”. Då påbörjas installationen atuomatiskt. När allt är klart ska det ha skapats en Testo-mapp i startmenyn, där du hittar den nya programikonen.
Similar products
testo 300 Pro II – O2 and CO up to 30 000 ppm
Measurement of O2 and CO (up to 30,000 ppm), optional NO
- CAMPAIGN! Until December 31, 2024, the first service is included free of charge with the purchase of a flue instrument! The offer can be used within 18 months of purchase.
- Suitable for large boilers
- Large touchscreen - as easy to use as your smartphone
- H2 compensated CO measuring cell
- Automatic dilution up to 30 000 ppm CO