Celsicom TH600 – internal temperature and humidity sensor

Directly connected moisture and temperature monitoring

  • Internal moisture and temperature sensor
  • Measurement range: -30°C ... +70°C, 0 ... 100 %RH
  • Low price on unlimited cloud storage

 2 745:-

Finns i lager

Finns i lager

Celsicom TH600 – direct connected humidity and temperature monitoring with internal sensors

Model TH600 has a compact, moisture-resistant enclosure and has internal sensors for humidity and temperature. A typical application could be remote monitoring of building climate and humidity.

The main benefits

No gateway or base station needed
All boxes in the new Celsicom generation have a direct, secure transfer of data to the cloud without the need for a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
Once you have scanned the QR code on your first box, a window opens on your mobile phone where you can create a new cloud service account. After filling in your data and naming the box, you can quickly get started and instantly see the values from the box on your phone, tablet or computer. If you already have an account, log in and name the new box.

Molntjänsten Celsiview
Obegränsad lagring!
Alla mätvärden lagras automatiskt i molntjänsten Celsiview. Priset för molnlagringen är 22:– i månaden per mätbox. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurement values to the cloud service, they are also saved in a backup memory in each box. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve
The curve below is an example of what it might look like on a mobile phone, tablet or computer when monitoring temperature and humidity.

Celsiview temperature moisture curve

Included in delivery

Celsicom Easy Connect TH600, internal temp/humidity sensor

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see the Accessories tab).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Measurement range-30 ... +70°C
0 ... 100%RH
Operating temperature-30 ... +70 °C
Accuracy±0.5°C
±3%RH (at 0 ... 90%RH)
ConnectionNB-IoT (LTE Cat NB1) B20
Output power 23 dBm
Batteries2 x AA/LR6 1.5V (not included)
Battery lifeDepending on transmission interval. Example at 20°C, good signal quality, measurement every 5 minutes and transmission every 3 hours: > 12 months
Measurement and transmission intervalsAdjustable by users via the Celsiview cloud service.
Memory200 measurements
SizeEnclosure 78 (w) x 114 (h) x 30 (d) mm
Weight114 grams (T/TH600, without battery)
CertificateCE
Mounting methodMounted vertically with the screw holes facing up
Protection class43
There are no probes for this item.
Icon
Celsicom-broschyr

Skriv din fråga i det här fältet.

Similar products

testo 160 TH – internal temperature and humidity sensors

Remote monitoring and logging via local WiFi network and free cloud service

  • Internal sensors for temperature and humidity
  • Measuring range: -10 ... +50 °C and 0 ... 100 %RH
  • Internal data memory for 40,000 measurements
  • Double security - measurement data is stored both in the logger and the cloud service


testo Saveris 2-H1 – moisture and temperature logger

Moisture logger with internal temperature and humidity sensor. Remote monitoring via local WiFi network and free cloud service.

  • Internal data memory for 2 x 10,000 measurements
  • Double security - measurement data is stored both in the logger and the cloud service
  • Exceeded limit values are immediately reported via SMS or e-mail.